Difference between revisions of "TUFLOW Message 2830"
Melissa1987 (talk | contribs) |
|||
| Line 7: | Line 7: | ||
|suggestions=Check the extent of nesting polygons is completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used. If "Model Origin and Extent" and "Orientation Angle" is set to "TGC" level 1 polygon doesn't need to be specified. In such case model domain will be used as level 1 polygon and nesting levels can be snapped to the code polygon.<br> | |suggestions=Check the extent of nesting polygons is completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used. If "Model Origin and Extent" and "Orientation Angle" is set to "TGC" level 1 polygon doesn't need to be specified. In such case model domain will be used as level 1 polygon and nesting levels can be snapped to the code polygon.<br> | ||
Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file. | Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file. | ||
| − | + | ||
| − | |||
| − | |||
|prelink=[[TUFLOW_Message_2829|Message 2829]] | |prelink=[[TUFLOW_Message_2829|Message 2829]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
|nextlink=[[TUFLOW_Message_2834|Message 2834]] | |nextlink=[[TUFLOW_Message_2834|Message 2834]] | ||
}} | }} | ||
Revision as of 16:15, 12 July 2022
TUFLOW Message
ERROR 2830 - Nesting polygon outside level 1 polygon.
Alternate Message
ERROR 2830 - Nesting polygon outside computational domain.
Message Type
ERROR
Description
Quadtree nesting polygons can only be completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used.
Quadtree nesting polygons can only be within the model domain.
Suggestions
Check the extent of nesting polygons is completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used. If "Model Origin and Extent" and "Orientation Angle" is set to "TGC" level 1 polygon doesn't need to be specified. In such case model domain will be used as level 1 polygon and nesting levels can be snapped to the code polygon.
Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file.
| Up |
|---|
 2xxx Messages
|