Difference between revisions of "TUFLOW Message 2830"

From Tuflow
Jump to navigation Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2830 - Nesting polygon outside level one polygon. |alt_msg=NA |type=ERROR |message_desc=Quadtree nesting polygons can only be within...")
 
 
(9 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 2830 - Nesting polygon outside level one polygon.
+
|tuflow_message=ERROR 2830 - Nesting polygon outside level 1 polygon.
|alt_msg=NA
+
|alt_msg=ERROR 2830 - Nesting polygon outside computational domain.
 
|type=[[ERROR]]
 
|type=[[ERROR]]
|message_desc=Quadtree nesting polygons can only be within level 1 polygon or snapped to level 1 polygon.
+
|message_desc=Quadtree nesting polygons can only be completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used.<br>
|suggestions=Check the extent of nesting polygons is within or snapped to level 1 polygon.
+
Quadtree nesting polygons can only be within the model domain.
|discussion_page=* [[Talk:TUFLOW Message 2830|Discuss Message 2830]]
+
|suggestions=Check the extent of nesting polygons is completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used. If "Model Origin and Extent" and "Orientation Angle" is set to "TGC" level 1 polygon doesn't need to be specified. In such case model domain will be used as level 1 polygon and nesting levels can be snapped to the code polygon.<br>
|link3=''
+
Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file.
|link4=''
+
 
|prelink=[[TUFLOW_Message_2829|Message 2829]]
 
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2834|Message 2834]]
 
 
}}
 
}}

Latest revision as of 10:02, 3 March 2023

TUFLOW Message
ERROR 2830 - Nesting polygon outside level 1 polygon.

Alternate Message
ERROR 2830 - Nesting polygon outside computational domain.

Message Type
ERROR

Description
Quadtree nesting polygons can only be completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used.
Quadtree nesting polygons can only be within the model domain.

Suggestions
Check the extent of nesting polygons is completely within level 1 polygon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used. If "Model Origin and Extent" and "Orientation Angle" is set to "TGC" level 1 polygon doesn't need to be specified. In such case model domain will be used as level 1 polygon and nesting levels can be snapped to the code polygon.
Check the dom_check file if it needs extending. If TUFLOW doesn't produce this file, insert "Verbose == ON" in .tcf to output pre-processing dom_check file.


Up
Go-up.png 2xxx Messages