Difference between revisions of "TUFLOW Message 3039"

From Tuflow
Jump to navigation Jump to search
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=ERROR 3039: Form loss factors must be >= 0.
+
|tuflow_message=ERROR 3039 - Form loss factors must be >= 0.
 
<br>  
 
<br>  
|alt_msg=None
+
|alt_msg=NA<br>
  
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
|message_desc=The value of specified Form Loss Coefficient must be greater than 0.0.  
+
|message_desc=Form loss (energy loss) factors may be applied on faces within regions.
|suggestions=The Form Loss Coefficient (FLC) can be used to apply an additional energy loss at the 2D cell side (in the same manner as for 2D flow constrictions).   
+
Negative form loss factors represent energy addition to the flow and are not permissible.
 +
|suggestions=Review the applied form loss factors to ensure they all are positive.   
  
 
|prelink=[[TUFLOW_Message_3038|Message 3038]]
 
|prelink=[[TUFLOW_Message_3038|Message 3038]]

Revision as of 16:37, 2 March 2023

TUFLOW Message
ERROR 3039 - Form loss factors must be >= 0.

Alternate Message
NA

Message Type
ERROR

Description
Form loss (energy loss) factors may be applied on faces within regions. Negative form loss factors represent energy addition to the flow and are not permissible.

Suggestions
Review the applied form loss factors to ensure they all are positive.


Up
Go-up.png 3xxx Messages