Tutorial M10 004 Check Files QGIS

From Tuflow
Jump to navigation Jump to search

Introduction

QGIS is used to import check files and review the dambreak hydrograph.

Method

This tutorial introduces:

Review the check files:

  1. Open the following files from the Module_10\TUFLOW\check folder:
    • M10_5m_004_sac_check_R.shp
  2. Use the 'Apply TUFLOW Styles to Open Layers' from the TUFLOW toolbar.
  3. The sac_check is related to the 2d_sa boundary layer and, by default, shows the lowest cell selected by the 2d_sa polygon and is where the dambreak hydrograph is applied.

    Animation M10 004 Check 01a.gif


Conclusion

  • The sac_check revealed the location of the applied hydrograph.


Up
Go-up.png Back to Module 10 Main Page