All public logs
Jump to navigation
Jump to search
Combined display of all available logs of Tuflow. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).
(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)- 23:41, 15 August 2025 RussellGardner talk contribs created page TUFLOW Message 2598 (Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2598 - Invalid bridge deck thickness detected. |alt_msg=NA |type=ERROR |message_desc= The Deck_Depth and Deck_p_Block attribute val...")
- 20:33, 16 July 2025 RussellGardner talk contribs deleted page Flood Modeller Tutorial Model/Archive (content was: "=Archived Module Data= The Flood Modeller-TUFLOW linking tutorial datasets created for MapInfo and ArcGIS can be downloaded at the following links: *[https://downloads.tuflow.com/_archive/TUFLOW/Tutorial_Model/FMT_Tutorial_Data_MapInfo.zip MapInfo Data Download] *[https://downloads.tuflow.com/_archive/TUFLOW/Tutorial_Model/FMT_Tutorial_Data_ArcGIS.zip A...", and the only contributor was "RussellGardner" (talk))
- 20:32, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Pipe Network (content was: "<ol> =Introduction= This page describes the method for using QGIS to create the GIS based layers representing the pipe network. Two layers will be created each representing the culverts and pits. The pipe network will be connected to the 2D model domain and and a depth-discharge relationship defined at the pits via the creation of a Pit Inlet Database. <b...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Flood Modeller1D/ESTRY 1D Link (content was: "=Introduction= This page describes the method in QGIS for linking TUFLOW 1D ESTRY networks to a 1D river channel represented within Flood Modeller. Firstly, a pipe network represented in ESTRY will be linked to Flood Modeller using an X1DH link. The Flood Modeller 1D network will then be extended downstream by connecting it to an ESTRY river network using...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Define Roughness (content was: "=Introduction= This page describes the method for creating the GIS based material types (land use areas) for the proposed development. Once these layers have been setup, surface roughness or bed-resistance values (e.g. Manning’s n) are assigned to each of these land use areas via the materials.csv file present in the model folder. =Method= <ol> <li>Cop...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Define Elevations (content was: "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information on this feature. =Method= <ol> <li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS SHP Boundary Conditions (content was: "<ol> =Introduction= This page details the method for using QGIS to create the GIS based boundary layer. The layer will be populated with the name of each inflow boundary which will be linked to the boundary database in the following steps of this module. The created boundary will be applied as a source-area boundary in a 2d_sa layer. <br> =Method= <u>'''Bo...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Pipe Network (content was: "<ol> =Introduction= This page describes the method for using QGIS to create the GIS based layers representing the pipe network. Two layers will be created each representing the culverts and pits. The pipe network will be connected to the 2D model domain and and a depth-discharge relationship defined at the pits via the creation of a Pit Inlet Database. <b...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Flood Modeller1D/ESTRY 1D Link (content was: "=Introduction= This page describes the method in QGIS for linking TUFLOW 1D ESTRY networks to a 1D river channel represented within Flood Modeller. Firstly, a pipe network represented in ESTRY will be linked to Flood Modeller using an X1DH link. The Flood Modeller 1D network will then be extended downstream by connecting it to an ESTRY river network using...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Define Roughness (content was: "=Introduction= This page describes the method for creating the GIS based material types (land use areas) for the proposed development. Once these layers have been setup, surface roughness or bed-resistance values (e.g. Manning’s n) are assigned to each of these land use areas via the materials.csv file present in the model folder. =Method= <ol> <li>Cop...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Define Elevations (content was: "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information on this feature. =Method= <ol> <li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 QGIS GPKG Boundary Conditions (content was: "<ol> =Introduction= This page details the method for using QGIS to create the GIS based boundary layer. The layer will be populated with the name of each inflow boundary which will be linked to the boundary database in the following steps of this module. The created boundary will be applied as a source-area boundary in a 2d_sa layer. <br> =Method= <u>'''Bo...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M02 ARC Define Elevations Archive (content was: "=Introduction= This page describes the method for using ArcGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information on this feature. =Method= <ol> <li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02...", and the only contributor was "RussellGardner" (talk))
- 20:31, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP x1D Nodes (content before blanking was: "<ol> =Introduction= We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify the spatial location of each of the linked Flood Modeller nodes. This allows TUFLOW to read the water levels from the Flood Modeller model and apply them to the TUFLOW domains as 2D water level boundaries. =Method= <li> Open the <b>FloodModeller_Nodes_P.shp</b> layer from the Module_Data\Mo...")
- 20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP Banks (content was: "<ol> =Introduction= In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modeller watercourse to the 2D TUFLOW floodplain.<br> Note that it is these cell elevations that determine whether water spills from the 1D Flood Modeller domain into the 2D TUFLOW domain. T...", and the only contributor was "RussellGardner" (talk))
- 20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP 1D2D Links (content was: "<ol> =Introduction= In this section we will set up the Flood Modeller-TUFLOW linkage to apply a water level boundary to the 2D cells along the 1D/2D interface. In the 2D boundary condition (2d_bc) GIS layer, we define the location at which this link occurs. The 2D water level applied at the 2D boundary cells is calculated in the 1D Flood Modeller component...", and the only contributor was "RussellGardner" (talk))
- 20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS SHP 1D2D Code (content was: "<ol> =Introduction= In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D representation of the open channel. The width of the deactivated 2D area should be approximately equal to the width of the 1D cross-sections. This step essentially replaces the conveyance of the deactivated 2D area with an equivalen...", and the only contributor was "RussellGardner" (talk))
- 20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG x1D Nodes (content was: "<ol> =Introduction= We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify the spatial location of each of the linked Flood Modeller nodes. This allows TUFLOW to read the water levels from the Flood Modeller model and apply them to the TUFLOW domains as 2D wa...", and the only contributor was "RussellGardner" (talk))
- 20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG Banks (content was: "<ol> =Introduction= In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modeller watercourse to the 2D TUFLOW floodplain.<br> Note that it is these cell elevations that determine whether water spills from the 1D Flood Modeller domain into the 2D TUFLOW domain. T...", and the only contributor was "RussellGardner" (talk))
- 20:30, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG 1D2D Links (content was: "<ol> =Introduction= In this section we will set up the Flood Modeller-TUFLOW linkage to apply a water level boundary to the 2D cells along the 1D/2D interface. In the 2D boundary condition (2d_bc) GIS layer, we define the location at which this link occurs. The 2D water level applied at the 2D boundary cells is calculated in the 1D Flood Modeller componen...", and the only contributor was "RussellGardner" (talk))
- 20:29, 16 July 2025 RussellGardner talk contribs deleted page FM Tute M01 QGIS GPKG 1D2D Code (content was: "<ol> =Introduction= In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D representation of the open channel. The width of the deactivated 2D area should be approximately equal to the width of the 1D cross-sections. This step essentially replaces the conveyance of the deactivated 2D area with an equivalen...", and the only contributor was "RussellGardner" (talk))
- 00:39, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS GPKG Flood Modeller1D/ESTRY 1D Link (Created page with "=Introduction= This page describes the method in QGIS for linking TUFLOW 1D ESTRY networks to a 1D river channel represented within Flood Modeller. Firstly, a pipe network re...")
- 00:39, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS SHP Flood Modeller1D/ESTRY 1D Link (Created page with "=Introduction= This page describes the method in QGIS for linking TUFLOW 1D ESTRY networks to a 1D river channel represented within Flood Modeller. Firstly, a pipe network re...")
- 00:38, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS GPKG Boundary Conditions (Created page with "<ol> =Introduction= This page details the method for using QGIS to create the GIS based boundary layer. The layer will be populated with the name of each inflow boundary which...")
- 00:38, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS SHP Boundary Conditions (Created page with "<ol> =Introduction= This page details the method for using QGIS to create the GIS based boundary layer. The layer will be populated with the name of each inflow boundary which...")
- 00:37, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS GPKG Pipe Network (Created page with "<ol> =Introduction= This page describes the method for using QGIS to create the GIS based layers representing the pipe network. Two layers will be created each representing t...")
- 00:37, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS SHP Pipe Network (Created page with "<ol> =Introduction= This page describes the method for using QGIS to create the GIS based layers representing the pipe network. Two layers will be created each representing t...")
- 00:36, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS GPKG Define Roughness (Created page with "=Introduction= This page describes the method for creating the GIS based material types (land use areas) for the proposed development. Once these layers have been setup, surf...")
- 00:35, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS SHP Define Roughness (Created page with "=Introduction= This page describes the method for creating the GIS based material types (land use areas) for the proposed development. Once these layers have been setup, surf...")
- 00:31, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS GPKG Define Elevations (Created page with "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the <u>[https://...")
- 00:30, 3 July 2025 RussellGardner talk contribs created page FM Tutorial M02 QGIS SHP Define Elevations (Created page with "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the <u>[https://...")
- 23:59, 27 June 2025 RussellGardner talk contribs created page File:Define External 1D Networks GPKG v2.mp4
- 23:59, 27 June 2025 RussellGardner talk contribs uploaded File:Define External 1D Networks GPKG v2.mp4
- 22:49, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS GPKG 1D2D Code (Created page with "<ol> =Introduction= In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D representation of the open channel. The width of...")
- 22:48, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS SHP 1D2D Code (Created page with "<ol> =Introduction= In this section we will deactivate the 2D cells where the 1D Flood Modeller component is replacing the 2D representation of the open channel. The width of...")
- 22:48, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS GPKG Banks (Created page with "<ol> =Introduction= In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modelle...")
- 22:48, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS SHP Banks (Created page with "<ol> =Introduction= In this section we will define the bank elevations of the watercourse. These are the elevations of the 1D/2D boundary cells that link the 1D Flood Modelle...")
- 22:47, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS GPKG 1D2D Links (Created page with "<ol> =Introduction= In this section we will set up the Flood Modeller-TUFLOW linkage to apply a water level boundary to the 2D cells along the 1D/2D interface. In the 2D boun...")
- 22:46, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS SHP 1D2D Links (Created page with "<ol> =Introduction= In this section we will set up the Flood Modeller-TUFLOW linkage to apply a water level boundary to the 2D cells along the 1D/2D interface. In the 2D bound...")
- 22:46, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS SHP x1D Nodes (Created page with "<ol> =Introduction= We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify t...")
- 22:45, 27 June 2025 RussellGardner talk contribs created page FM Tutorial M01 QGIS GPKG x1D Nodes (Created page with "<ol> =Introduction= We will now create a TUFLOW GIS layer to reference the external 1D nodes within the Flood Modeller model network. The purpose of this layer is to specify t...")
- 23:53, 24 June 2025 RussellGardner talk contribs created page Flood Modeller Tutorial Model Provisional (Created page with "=Introduction= The objective of this Flood Modeller – TUFLOW model is to demonstrate the ability of TUFLOW to link to an external 1D scheme and the various methods available...")
- 23:47, 24 June 2025 RussellGardner talk contribs created page File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part3.mp4
- 23:47, 24 June 2025 RussellGardner talk contribs uploaded File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part3.mp4
- 23:46, 24 June 2025 RussellGardner talk contribs created page File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part2.mp4
- 23:46, 24 June 2025 RussellGardner talk contribs uploaded File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part2.mp4
- 23:45, 24 June 2025 RussellGardner talk contribs created page File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part1.mp4
- 23:45, 24 June 2025 RussellGardner talk contribs uploaded File:FMP ESTRY 1D Link Module 02 QGIS GPKG Part1.mp4
- 23:42, 24 June 2025 RussellGardner talk contribs created page File:FMP ESTRY 1D Link Module 02 QGIS SHP Part3.mp4
- 23:42, 24 June 2025 RussellGardner talk contribs uploaded File:FMP ESTRY 1D Link Module 02 QGIS SHP Part3.mp4