TUFLOW Message 5052

TUFLOW Message
ERROR 5052 - Number of output times for nodestring boundaries must be greater than 1.

Alternate Message
ERROR 5052 - Number of output times for lateral boundaries must be greater than 1.

Message Type
ERROR

Description
In a TUFLOW CATCH simulation, the nodestring/lateral boundaries must be output more than once. I.e. the nodestring/lateral boundary output interval must be less than the length of the simulation.

Suggestions
In the 'Global Commands' section of the TUFLOW CATCH Control file (.tcc), ensure the nodestring/lateral boundary output interval is set to less than the length of the simulation. For example, if the simulation is 3 hours (10800 seconds), the interval(s) must be less than or equal to 10800:

Catch BC Output Interval Nodestring == 300

Catch BC Output Interval Lateral == 300

Refer to the TUFLOW CATCH Manual for more information on boundary outputs.

Up
5xxx Messages