TUFLOW Message 5108

From Tuflow
Jump to navigation Jump to search

TUFLOW Message
ERROR 5108 - End catchment hydraulic model command missing. Exiting.

Alternate Message
NA

Message Type
ERROR

Description
In the TUFLOW CATCH Control file (.tcc), the command "End Catchment Hydraulic Model" is missing at the end of the catchment hydraulic model block.

Suggestions
Ensure that the catchment hydraulic model block is structured as follows:

Catchment Hydraulic Model ==
...catchment hydraulic model commands...
...catchment hydraulic model commands...
...catchment hydraulic model commands...
End Catchment Hydraulic Model

Refer to the TUFLOW CATCH Manual for more information.


Up
Go-up.png 5xxx Messages
Retrieved from "https://wiki.tuflow.com/w/index.php?title=TUFLOW_Message_5108&oldid=42710"