Tutorial M10 002 Check Files QGIS

From Tuflow
Jump to navigation Jump to search


QGIS is used to import the check files and review the dam break.


This tutorial introduces:

Review the check files:

  1. Open the following files from the Module_10\TUFLOW\check folder:
    • M10_5m_002_vzsh_zpt_check_P.shp
  2. Use the 'Apply TUFLOW Styles to Open Layers'.
  3. The vzsh_zpt_check file contains information on the elevation points that change over time, elevation change, final elevation and trigger conditions.
    Note: [35;70] is a unique identifier of the grid cell that the water level trigger point is contained within. It comes from the the grd_check layer where, in this example, the attribute 'n' is 35 and 'm' is 70 for the cell containing the trigger.


  • The topographic modifications representing the dam break were inspected.

Go-up.png Back to Module 10 Main Page