TUFLOW Message 5108: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
Created page with "{{TUFLOW_Message |tuflow_message=ERROR 5108 - End catchment hydraulic model command missing. Exiting. |alt_msg=NA |type=ERROR |message_desc=In the TUFLOW CATCH Control fil..." |
(No difference)
|
Latest revision as of 12:20, 1 April 2025
TUFLOW Message
ERROR 5108 - End catchment hydraulic model command missing. Exiting.
Alternate Message
NA
Message Type
ERROR
Description
In the TUFLOW CATCH Control file (.tcc), the command "End Catchment Hydraulic Model" is missing at the end of the catchment hydraulic model block.
Suggestions
Ensure that the catchment hydraulic model block is structured as follows:
- Catchment Hydraulic Model ==
- ...catchment hydraulic model commands...
- ...catchment hydraulic model commands...
- ...catchment hydraulic model commands...
- End Catchment Hydraulic Model
Refer to the TUFLOW CATCH Manual for more information.
| Up |
|---|
 5xxx Messages
|