Revision as of 01:33, 27 October 2016 view source Andrew.Sims (talk \| contribs) 155 edits →TGC File ← Older edit		Revision as of 01:40, 27 October 2016 view source Andrew.Sims (talk \| contribs) 155 edits →TGC File Newer edit →
Line 94: <li> Open FMT_M01_001.tgc or navigate to the correct tab. Add an extra line in <font color="green"><tt> ! Model Grid Commands </tt></font> reading: </li> '''Mapinfo'''<br> :<font color="blue"><tt>Read GIS Code BC </tt></font> <font color="red"><tt>== </tt></font> mi\2d_bc_FMT_M01_001_HX_001.MIF<font color="green"><tt> ! Deactivates the cells where the creek channel has been modelled in 1D </tt></font> '''Other GIS'''<br> :<font color="blue"><tt>Read GIS Code BC </tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_FMT_M01_001_HX_001_p.shp \| 2d_bc_FMT_M01_HX_001_L.shp <font color="green"><tt> ! Deactivates the cells where the creek channel has been modelled in 1D </tt></font> <li> Topography amendments should be added in a new section. These are: </li> '''Mapinfo'''<br> :<font color="green"><tt> ! Read GIS Z Shape </tt></font> <font color="red"><tt>==</tt></font> mi\2d_zsh_M03_thalweg_001.MIF <font color="green"><tt> ! This GIS layer is commented out / removed from the model as the creek channel has been modelled in 1D </tt></font> :<font color="blue"><tt>Read GIS Z Shape </tt></font> <font color="red"><tt>==</tt></font> mi\2d_zsh_M03_Rd_Crest_001.MIF<font color="green"><tt> ! GIS layer used to define the road crest </tt></font> :<font color="blue"><tt>Read GIS Z HX Line MAX </tt></font> <font color="red"><tt>==</tt></font> mi\2d_bc_FMT_M01_HX_001.MIF<font color="green"><tt>! Defines the bank crest levels (1D/2D boundary cell elevations). The 'MAX' option prevents any zpt elevations from being lowered </tt></font> '''Other GIS'''<br> :<font color="green"><tt> ! Read GIS Z Shape </tt></font> <font color="red"><tt>==</tt></font> gis\2d_zsh_M03_thalweg_001.shp <font color="green"><tt> ! This GIS layer is commented out / removed from the model as the creek channel has been modelled in 1D </tt></font> :<font color="blue"><tt>Read GIS Z Shape </tt></font> <font color="red"><tt>==</tt></font> gis\2d_zsh_M03_Rd_Crest_001_L.shp \| gis\2d_zsh_M03_Rd_Crest_001_P.shp <font color="green"><tt> ! GIS layer used to define the road crest </tt></font>

Flood Modeller Tutorial Module01: Difference between revisions