Flood Modeller Tutorial Module01: Difference between revisions
Content deleted Content added
Line 146:
:<font color="blue"><tt>Read GIS X1D Network</tt></font> <font color="red"><tt>== </tt></font>..\model\mi\1d_x1d_FMT_M01_nwk_001.MIF <font color="green"><tt>! GIS layer representing channels to allow for the digitisation of Water Level Lines (optional)</tt></font>
:<font color="blue"><tt>Read GIS X1D WLL</tt></font> <font color="red"><tt>== </tt></font> ..\model\mi\1d_x1d_WLL_FMT_M01_001.MIF <font color="green"><tt>! GIS layer containing WLLs for visualising 1D results in 2D</tt></font>
'''Other GIS'''<br>
:<font color="blue"><tt>Read GIS X1D Nodes</tt></font> <font color="red"><tt>== </tt></font>..\model\gis\1d_x1d_FMT_M01_nodes_001_p.shp <font color="green"><tt>! GIS layer referencing node IDs from Flood Modeller </tt></font>
:<font color="blue"><tt>Read GIS X1D Network</tt></font> <font color="red"><tt>== </tt></font>..\model\gis\1d_x1d_FMT_M01_nwk_001_L.shp <font color="green"><tt>! GIS layer representing channels to allow for the digitisation of Water Level Lines (optional)</tt></font>
:<font color="blue"><tt>Read GIS X1D WLL</tt></font> <font color="red"><tt>== </tt></font> ..\model\gis\1d_x1d_WLL_FMT_M01_001_p.shp <font color="green"><tt>! GIS layer containing WLLs for visualising 1D results in 2D</tt></font>
<br>
<li> Now update the culverts currently included in the model:
'''Mapinfo'''<br>
:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>== </tt></font>..\model\mi\1d_nwk_FMT_M01_culverts_001.MIF
'''Other GIS'''<br>
:<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>== </tt></font>..\model\gis\1d_nwk_FMT_M01_culverts_001.SHP
<li>
:<font color="blue"><tt>Geometry Control File</tt></font> <font color="red"><tt>== </tt></font>..\model\FMT_M01_001.tgc
:<font color="blue"><tt>BC Control File</tt></font> <font color="red"><tt>== </tt></font>..\model\FMT_M01_001.tbc
| |||