Revision as of 20:31, 16 November 2016 view source Rachel (talk \| contribs) 465 edits →IEF File ← Older edit		Revision as of 20:41, 16 November 2016 view source Rachel (talk \| contribs) 465 edits →Run the Simulation Newer edit →
Line 198: =Run the Simulation= There are a number of different methods in which to start a Flood Modeller – TUFLOW model. Please refer to the [[Running_linked_Flood_Modeller_-_TUFLOW_Models \| following page]] for a detailed discussion on each of these methods. <br> ~~Using~~Use your preferred method, to start the model ~~FMT_0100F_001~~<b>FMT_M01_001.ief</b> or follow the guidance below. If the simulation fails to start, please refer to the troubleshooting guidance on this page. <br> <br> In the <b>Complete_Model\FMT_M01\Flood_Modeller\IEF</b> folder a batch file has been provided. To use the batch file in this tutorial:<br> Ensure that you [http://wiki.tuflow.com/index.php?title=Running_linked_Flood_Modeller_-_TUFLOW_Models#Batch_File set up the installation folders]. Move the batch file to the <b>FMT_Tutorial\FMT_M01\Flood_Modeller\IEF</b> folder Open the batch file in a text editor. On the 'set FloodModeller=' line, change the path from the one provided to the full path to the ISISf32.exe file that you set up with the installation folders. Save and close the file *Double click the batch file in your file explorer to run the file <br>

Flood Modeller Tutorial Module01: Difference between revisions