Revision as of 13:15, 13 August 2021 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,395 edits →TUFLOW crashes during model initialisation ← Older edit		Revision as of 13:25, 13 August 2021 view source Pavlina Monhartova (talk \| contribs) Bureaucrats, Administrators 5,395 edits →TUFLOW crashes during the simulation at the same run time Newer edit →
Line 91: '''Suggestions:''' * Ensure storage locations that outputs are written to have ample free space. Depending on the infrastructure, reported free space may not be accurate, or performance of storage may substantially degrade as it nears being full. * ~~If the output drive does have more than enough space, insert~~Insert "pause" at the end of the batch file and remove any start "TUFLOW", -b and/or -t switch to keep the simulation console window open and send a snapshot of the console window ~~and~~ ,.tlf and .hpc.tlf to support@tuflow.com. Note: the simulation console window is one stating for example "TUFLOW Build: 2020-10-AB-iSP-w64" in the header's top left corner. If the only console window that stays open states "C:\\WINDOWS\system32\cmd.exe" that is the batch file console window which won't provide desired information. <u>[[Run_TUFLOW_From_a_Batch-file#Batch_file_for_Tutorial_Model_Module_1 \| Simple batch file]]</u> should be used if ~~looping~~current batch file doesn't keep the simulation console window open ~~even with the suggested changes~~.<br> <br>

TUFLOW crashing: Difference between revisions