Tutorial M06 002 GIS Inputs QGIS GPKG

Page Under Construction

Introduction

QGIS is used to create, import and view input data.

TUFLOW Project Re-Configuration

Re-configure the TUFLOW project to use and save empty files to the correct folder:

1. Go to Plugins > TUFLOW > Editing > Configure / Create TUFLOW Project.
2. Change the folder which contains TUFLOW to the Module_06 folder. This is the only change required, the model folder structure and template empty files are supplied from previous model.
   Note: The 'results' and 'check' folder get automatically created when the TUFLOW model is run.
   
3. Click 'OK' and save the QGIS workspace by selecting Project > Save As.
   
   
   
   
4. Set the QGIS workspace projection to EPSG:32760, see Set the Projection.

Method

Set up the GeoPackage Database:

1. Navigate to the Module_06\TUFLOW\model\gis folder. Save a copy of M02_001.gpkg as M06_002.gpkg.
2. Within the QGIS Browser Panel, right click on 'Favorites' and select 'Add a Directory...'.
3. Navigate to the Module_06 folder and select it.

Create a 2d_rf layer with digitised polygons based on the input rainfall hyetographs:

1. Click on the ‘Import Empty File’ tool from the TUFLOW plugin toolbar.
2. Select '2d_rf' from the Empty Type list.
3. In the Run ID box write: 'M06_polygons_002'.
4. Tick the 'Regions' Geometry Type.
5. In the Spatial Database Options, select 'All to one'. Navigate to the Module_06/TUFLOW/model/gis folder and select M06_002.gpkg. Click Save and hit 'OK'.
6. The 2d_rf_M06_polygons_002_R appears in the QGIS Layers Panel.

The same catchment breakup is used as the 2d_sa layer:

1. Load in the 2d_sa_M01_001_R layer from M06_002.gpkg, either:

   • Within the QGIS Browser Panel, navigate to M06_002.gpkg and double click the layer, or
   • In File Explorer, drag and drop the M06_002.gpkg into the QGIS workspace and select the layer.

2. Copy and paste the polygons from the 2d_sa layer into the 2d_rf:
   
   
   
   
3. Open the attribute table of the 2d_rf layer and make the following edits:

   • Update names to match the names in the rainfall_stations.csv input data (RF_FC04, RF_FC05, RF_FC06, RF_FC07)
   • f1: 1
   • f2: 1
     

   The attributes f1 and f2 are multipliers adjusting the rainfall spatially. No adjustments are made, a value of 1, e.g. 100% of specified rainfall is used.
   
4. Turn off editing to save the edits.
   
   
   

Conclusion

• Polygons have been digitised based on input rainfall hyetographs.

Up
Back to Module 6 Main Page