Revision as of 22:20, 15 August 2023

Introduction

QGIS is used to import the check files and review the dam break.

This tutorial introduces:

Review the check files:

Open the file, either:
- Within the QGIS Browser Panel, navigate to Module_10\TUFLOW\check\M10_5m_002_Check.gpkg and double click the following layer, or
M10_5m_002_vzsh_zpt_check_P
- In File Explorer, navigate to the Module_10\TUFLOW\check folder, drag and drop the M10_5m_002_Check.gpkg into the QGIS workspace and select the layer above.
Use the 'Apply TUFLOW Styles to Open Layers'.
Use the 'Apply GPKG Layer Names'.
The vzsh_zpt_check file contains information on the elevation points that change over time, elevation change, final elevation and trigger conditions.
Note: [36;71] is a unique identifier of the grid cell that the water level trigger point is contained within. It comes from the the grd_check layer where, in this example, the attribute 'n' is 36 and 'm' is 71 for the cell containing the trigger.

Up
Back to Module 10 Main Page

@@ Line 16: / Line 16: @@
 <li>Use the 'Apply GPKG Layer Names'.
 <li>The vzsh_zpt_check file contains information on the elevation points that change over time, elevation change, final elevation and trigger conditions.<br>
-Note: [36;71] is a unique identifier of the grid cell that the water level trigger point is contained within. It comes from the the grd_check layer where, in this example, the attribute 'n' is 35 and 'm' is 70 for the cell containing the trigger. <br>
+Note: [36;71] is a unique identifier of the grid cell that the water level trigger point is contained within. It comes from the the grd_check layer where, in this example, the attribute 'n' is 36 and 'm' is 71 for the cell containing the trigger. <br>
 <br>
 {{Video|name=Animation_M10_GPKG_002_Check_01.mp4|width=1230}}<br>