Revision as of 11:22, 6 December 2023 view source Emilie Nielsen (talk \| contribs) Administrators 6,146 edits →Running the Simulation ← Older edit		Revision as of 11:41, 6 December 2023 view source Emilie Nielsen (talk \| contribs) Administrators 6,146 edits →Simulation Control Files Newer edit →
Line 220: = Simulation Control Files = To differentiate the TUFLOW SWMM tutorials from the TUFLOW/ESTRY tutorials, TS will be used as the new file prefix in this series of tutorials. Set up the simulation control files: <ol> <li>Save a copy of '''M01_001.tbc''' as '''TS01_001.~~tbc~~tgc''' in the '''''TUFLOW_SWMM_Module_01\TUFLOW\model''''' folder.▼ ~~<li> Open M02_5m_001.tcf~~ <li> ~~Save~~Create a ~~copy~~new oftext ~~'''M02_5m_001.tcf'''~~file ascalled '''~~TS01_5m_001~~TS01_001.~~tcf~~tscf''' and save it in the '''''TUFLOW_SWMM_Module_01\TUFLOW\~~runs''~~model''' folder. <li>Save a copy of '''M02_5m_001.tcf''' as '''TS01_5m_001.tcf''' in the '''TUFLOW_SWMM_Module_01\TUFLOW\runs''' folder. </ol> === TUFLOW Control File (TCF) ===▼ <ol>▼ <li>Open the '''TS01_5m_001.tcf''' in a text editor~~:<br>~~. It is recommended to use Notepad++.▼ <li>Add the following line in the '<font color="green"><tt>Model Inputs</tt></font>' section: <br>▼ <font color="blue"><tt>SWMM Control File </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt> ..\model\TS01_001.tscf </tt></font> <font color="green"><tt> ! Reference the SWMM (1D) Control File</tt></font> <br>▼ <li>Add the following line in the '<font color="green"><tt>Output Settings</tt></font>' section: <br>▼ <font color="blue"><tt>NetCDF Output Start Date </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>2020-01-01 00:00 </tt></font> <font color="green"><tt>! Sets the output units for the NetCDF time variable</tt></font> <br> ▼ <li>Make the following reference update: <br>▼ <font color="blue"><tt>BC Control File </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>..\model\TS01_001.tbc</tt></font> <font color="green"><tt> ! Reference the TUFLOW Boundary Conditions Control File</tt></font> <br>▼ <li>Save the TCF.▼ </ol>▼ <font color="red">'''<< Add video >>'''</font>▼ === TUFLOW Boundary Control File (TBC) === <ol> <li>~~Open~~From '''~~M01_001~~TS01_001.~~tbc~~tcf'''~~. If using Notepad++~~, right click ~~the~~'''TS01_001.tgc''' ~~file~~and ~~reference~~select in'Open ~~the~~File'. ~~TCF~~This ~~and select~~opens '''~~Open File~~TS01_001.tgc''' into a new tab in Notepad ++. <li>Add the following lines after the '<font color="blue"><tt>~~Spatial~~Read GIS SA ~~Database~~</tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>~~swmm\TS01_001.gpkg~~2d_sa_M01_001_R</tt></font>' command: <br>▼ ▲<li>Save '''M01_001.tbc''' as '''TS01_001.tbc''' in the '''''TUFLOW_SWMM_Module_01\TUFLOW\model''''' folder. <font color="blue"><tt>Spatial Database</tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>swmm\TS01_001.gpkg</tt></font> <font color="green"><tt> ! Specify the location of the GeoPackage Spatial Database</tt></font> <br> ~~<li>Add the following additional command lines to '''TS01_001.tbc''': <br>~~ ▲<font color="blue"><tt>Spatial Database</tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>swmm\TS01_001.gpkg</tt></font><br> <font color="blue"><tt>Read GIS BC </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>2d_bc_SWMM_Connections_001_L</tt></font> <font color="green"><tt> ! Links the 1D culverts to the 2D domain</tt></font> <br> <li>Save the TBC. Line 240 ⟶ 253: A new control file, the TUFLOW SWMM Control File (TSCF), is introduced. SWMM is a 1D hydraulic solver. All 1D SWMM files and commands are referenced in the TUFLOW SWMM Control File.<br> <ol> <li>~~Create~~From a'''TS01_001.tcf''', ~~new~~right ~~text file called~~click '''TS01_001.tscf''', ~~saved~~and inselect ~~the~~'Open File'. This opens '''~~'TUFLOW_SWMM_Module_01\TUFLOW\model''~~TS01_001.tscf''' ~~folder~~into a new tab in Notepad ++. <li>Add the following command ~~lines~~: <br> <font color="blue"><tt>Read SWMM </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>swmm\TS01_001.inp</tt></font> <font color="green"><tt> ! 1D SWMM input file</tt></font> <br> <li>Save the TSCF. <br> ▲</ol> ▲<font color="red">'''<< Add video >>'''</font> ▲=== TUFLOW Control File (TCF) === ▲<ol> ▲<li>Open the '''TS01_5m_001.tcf''' in a text editor:<br> ▲Add the following line in the 'Model Inputs' section: <br> ▲<font color="blue"><tt>SWMM Control File </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt> ..\model\TS01_001.tscf </tt></font> <font color="green"><tt> ! Reference the SWMM (1D) Control File</tt></font> <br> ▲Add the following line in the 'Output Settings' section: <br> ▲<font color="blue"><tt>NetCDF Output Start Date </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>2020-01-01 00:00 </tt></font> <font color="green"><tt>! Sets the output units for the NetCDF time variable</tt></font> <br> ▲<li>Make the following reference update: <br> ▲<font color="blue"><tt>BC Control File </tt></font> <font color="red"><tt>== </tt></font> <font color="black"><tt>..\model\TS01_001.tbc</tt></font> <font color="green"><tt> ! Reference the TUFLOW Boundary Conditions Control File</tt></font> <br> ▲<li>Save the TCF. </ol> <font color="red">'''<< Add video >>'''</font>

TUFLOW SWMM Tutorial M01: Difference between revisions