TUFLOW SWMM Tutorial M01: Difference between revisions
Content deleted Content added
Line 171:
=== Create 1D/2D Connections===
The following instructions introduce a new tool that automates the creation of 1D/2D connections. For 1D SWMM, HX lines are required from the upstream end of the culvert, and SX connections are used at the downstream end of the culvert.<br>
'''Note:''' The positions of the HX and SX connections may not be completely accurate, so it is recommended to check the output. In this module, '''2d_bc_SWMM_Culvert_Connections_001_L''' is checked in <u>[[TUFLOW SWMM Tutorial M01 Check QGIS|TUFLOW SWMM Tutorial 01 Check Files]]</u>.<br>▼
<ol>
<li>In the QGIS Layers panel, select (left click) '''Links--Conduits'''.
Line 192 ⟶ 193:
<br>
</ol>
▲'''Note:''' The positions of the HX and SX connections may not be completely accurate, so it is recommended to check the output. In this module, '''2d_bc_SWMM_Culvert_Connections_001_L''' is checked in <u>[[TUFLOW SWMM Tutorial M01 Check QGIS|TUFLOW SWMM Tutorial 01 Check Files]]</u>.
===Update Junction Details===
| |||