Tuflow

TUFLOW SWMM Tutorial M02: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 354:
Copy the following TUFLOW geometry inputs to GeoPackage '''TS02_001.gpkg''':
<ol>
<li>Right click anywhere in the QGIS toolbarToolbar panelPanel and tick on 'Browser Panel' from the 'Panels' options.
<li>Within the QGIS Browser panelPanel, there is a dropdown directory, 'Project Home'. This directory is a shortcut to the location where the QGIS workspace is saved. In this case, it is a shortcut to the '''TUFLOW_SWMM_Module_02''' folder.
<li>In the 'Project Home' directory, navigate to the '''TUFLOW_SWMM_Module_02\Tutorial_Data''' folder.
<li>Drag the following layers from the '''Urban_Development.gpkg''' and drop them into the '''TS02_001.gpkg''' contained within the '''TUFLOW_SWMM_Module_02\TUFLOW\model\gis''' folder:
Line 363:
:*'''2d_ztin_TS02_Dev_001_P'''
:*'''2d_ztin_TS02_Dev_001_R'''
Hold Ctrl in on the keyboard to select multiple layers at the same time.
</ol>
'''Note:''' The focus of this tutorial is not to demonstrate 2D geometry updates. If you are interested in learning about the above '''2d_ztin''' and '''2d_mat''' changes, please refer to <u>[[Tutorial_M02 |TUFLOW Tutorial Module 2]]</u>.
Retrieved from "https://wiki.tuflow.com/TUFLOW_SWMM_Tutorial_M02"