1D Pits: Difference between revisions
Content deleted Content added
Line 15:
! R
| [[File:Side_Entry_pit.jpg|thumb|none|300px|Kerb Inlet]]
|| Kerb inlets, also known as side entry pits or lintels, are common in Australia. The pit chamber can vary depending on overall depth, length, and the addition of any haunched riser units.
Height_or_WF: Sets the height of the pit inlet channel in the vertical plane.
|| [[File:Side entry pit dimensions.jpg|300px|thumb|none|Kerb Inlet with dimensions]]
|-
! C
| [[File:Circular pit inlet.jpg|thumb|none|300px|Circular Pit Inlet]]
|| Circular pit inlet.<br><br>
▲|| Circular pit inlet. Width_or_Dia: sets the diameter of the pit inlet cross-section in the vertical plane. Height_or_WF: Not used.
Width_or_Dia: Sets the diameter of the pit inlet cross-section in the vertical plane.<br>
Height_or_WF: Not used.
|| [[File:Circular pit inlet dimensions.jpg|300px|thumb|none|Circular Pit Inlet with dimensions]]
|-
! W
| [[File:Gully pit.jpg|thumb|none|300px|Grate (London, UK)]]
|| Grates, also known as Gully Pits, are common in the United Kingdom and are generally a square grate on top of a circular chamber and a riser outlet. The outlet will then feed into a larger culvert that forms part of the larger urban drainage network.
Width_or_Dia: Sets the diameter of the pit inlet cross-section in the vertical plane.<br>
Height_or_WF: Not used.
|| [[File:Gully pit dimensions.jpg|300px|thumb|none|Grate with dimensions]]
|}
| |||