TUFLOW CATCH Tutorial M01 Results QGIS: Difference between revisions
Content deleted Content added
Line 12:
Review the time series data for the receiving polygon:
<ol>
<li> In Windows File Explorer, navigate to the '''
<li> This file contains incoming flow and concentrations at an interval of 5mins. This interval is defined via the <tt><font color=blue>
<li> Salinity and dissolved oxygen are both constant, so the outputs should be constant throughout the entire simulation. <br>
<br>
Line 22:
[[File: graph of ecoli over time?]]<br>
<br>
<li> When plotting flow vs pollutants, there is a noticeable spike in pollutant levels when the dry store release threshold is reached, followed by a gradual decline through the remainder of the simulation. <br>
<br>
[[File: graph of flow vs pollutant concentrations, pathogens on separate graph]]<br>
<br>
:'''Note:''' The pathogen concentrations are plotted on a logarithmic scale.
</ol>
Review the mass balance time series data:
<ol>
<li> In Windows File Explorer, navigate to the '''TUFLOWCATCH\bc_dbase''' folder and open '''TC01_001_catchment_hydraulic_mass_balance.csv'''.
<li> This file contains the total of the surface and groundwater flow (m^3) and associated pollutant masses leaving the TUFLOW HPC model to the receiving polygon. The outputs are written in the same interval as the '''TC01_001_catchment_hydraulic_receiving.csv'''.
<li> No groundwater has been simulated in the model, <font color=red> need to do this still</font><br>
<br>
[[File: ]]<br>
<br>
</ol>
| |||