Revision as of 05:02, 15 November 2016 view source Rachel (talk \| contribs) 465 edits →TBC File ← Older edit		Revision as of 05:10, 15 November 2016 view source Rachel (talk \| contribs) 465 edits →TBC File Newer edit →
Line 99: We will now reference the model boundary files created in previous steps. <li> Update the 1D/2D boundaries to reference the HX lines created</li> <li> Remove the external inflows applied to the TUFLOW model, these are now applied in Flood Modeller</li> ~~<li>~~ <li> Update the ESTRY culverts layer, some of these culverts are now modelled in Flood Modeller</li> ~~We need to add the internal 1D/2D boundaries. We need to update the culvert boundaries and include the HX boundaries for the open channel sections. </li>~~ <ol> ~~<li> Open '''FMT_M01_001.tbc''' or navigate to the correct tab.</li>* The 1D/2D boundaries we need to add are~~ <li> Open '''M02_5m_001.tbc''' and save a copy as '''FMT_M01_001.tbc'''. <li> Remove the boundary linking to the TUFLOW inflows by:<br> '''Mapinfo''' :Put an exclamation mark before the line reading:<br> :<font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> mi\2d_bc_M01_002.MIF '''Other GIS''' :Put an exclamation mark before the line reading:<br> :<font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> gis\2d_bc_M01_002.SHP <li> Add the Boundaries for the culverts and to link to Flood Modeller:</li> '''Mapinfo''' :<font color="blue"><tt>Read GIS BC</tt></font> <font color="red"><tt>== </tt></font> mi\2d_bc_M04_culverts_001.MIF <font color="green"><tt>! This command reads in SX boundaries linking the 1D ESTRY culverts to the 2D domain</tt></font> Line 112 ⟶ 122: <li> Save the file. The boundary file is now ready to be used. </ol> ==TCF File==

Flood Modeller Tutorial Module01: Difference between revisions