TUFLOW SWMM Tutorial M02: Difference between revisions

The 'Inlet' Attribute within '''swmm_iu_TS02_001''' is an ID reference to inlet geometry and associated information listed within '''sw02_001.gpkg''' >> '''Inlets--Inlets'''. A single inlet type, 'Combo1', was referenced in '''swmm_iu_TS02_001''' (the provided Inlet Usage Layer). In recognition of this, we need to create the entry for 'Combo1' in the '''Inlets--Inlets''' layer.

<ol>

<li>Right click '''Inlets--Inlets''' and select 'Open Attribute Table'.

<li>Click 'Add Feature'. Enter the following attributes (leave all other fields as ''NULL''):