1D Pits: Difference between revisions
Content deleted Content added
Rohan.king (talk | contribs) |
Rohan.king (talk | contribs) |
||
Line 27:
=Pit search radius=
Within the *.ecf the following command is required to have TUFLOW connect floating nodes into the 1D network where connectors are not snapped to channel ends:<br>
<br>▼
<font color="blue"><tt>Pit Search Distance</tt></font> <font color="red"><tt>==</tt></font><tt>xxx</tt><br>
<font color="blue"><tt>Read GIS Network</tt></font> <font color="red"><tt>==</tt></font><tt>..\model\mi\1d_nwke_*****.MIF</tt><br>
The order of the 'Pit Search Distance' command is important as it can be repeated multiple times with different values that are assigned to the 1d_nwke(s) below the Pit Search Distance command.▼
<br>
▲The order of the ''Pit Search Distance'' command is important as it can be repeated multiple times with different values that are assigned to the 1d_nwke(s) below the ''Pit Search Distance'' command. <br>
There is an example on the TUFLOW Forum [http://www.tuflow.com/forum/index.php?/topic/1232-pit-search-distance-not-working/ here] that describes the setup of the commands within the .ecf
▲<br>
To check if the ''Pit Search Distance'' is working as expected, import the [[Check_Files_1d_nwk_C | *_nwk_C_check]] file to visually see if the pits are automatically connecting to a culvert. The image below is an example of the *_nwk_C_check file and the connections TUFLOW has made to each pit. <br>
[[File:Pit_search_distance_check.JPG|border|500px]]
| |||