Industry Modelling Guidelines
Useful modelling guidelines are listed below:
| Topic | Source | Link |
|---|---|---|
| Hydraulic Design of Waterway Structures | AUSTROADS | Link |
| TUFLOW Manual | BMT | Link |
| Manning's Roughness Guideline | BCC (Brisbane City Council) | Link |
| Code of practice for the Hydraulic Modelling of Urban Drainage Systems | CIWEM (Chartered Institution of Water and Environmental Management) | Link |
| Integrated Urban Drainage Modelling Guideline | CIWEM (Chartered Institution of Water and Environmental Management) | Link |
| Embankment Breach Parameters | David Froehlich | Link |
| Hydraulic Analysis and Design | EA (UK Environment Agency) | Link |
| Pumped Catchments-Worked Example of hydrological assessment and hydraulic modelling | EA (UK Environment Agency) | Link |
| Australian Rainfall and Runoff (All Projects/Chapters) | Engineers Australia | Link |
| Representation of Buildings in Numerical Flood Models | Engineers Australia | Link |
| Two Dimensional Modelling in Urban and Rural Floodplains | Engineers Australia | Link |
| Hydraulics of Bridged Waterways | FHWA (Federal Highways Administration) | Link |
| Modelling for Flood Consequence Assessments | NRW (Natural Resources Wales) | Link |
| Flood Risk Management: Modelling Blockage and Breach Scenarios | NRW (Natural Resources Wales) | Link |
| Incorporating Australian Rainfall and Runoff 2016 / 2019 in Flood Studies | NSW DPIE (NSW Department of Planning, Industry and Environment) | Link |
| Manning's Roughness Guideline | ODOT (Oregon Department of Transportation) | Link |
| A Guide to Flood Studies and Mapping in Queensland | QLD DNRM (QLD Department of Natural Resources and Mines) | Link |
| Modelling and Design Guideline for Cross Drainage and Flooding Assessments | QLD DTMR (QLD Department of Transport and Main Roads) | Link |
| Flood Modelling Guidance for Responsible Authorities | SEPA (Scottish Environment Protection Agency) | Link |
| Technical Flood Risk Guidance for Stakeholders | SEPA (Scottish Environment Protection Agency) | Link |
| Photographic Guidance for Selecting Flow Resistance Coefficients in High-Gradient Channels | USA Department of Agriculture | Link |
| Pit Inlet Curves | Various Sources | Link |
| The Revitalised Flood Hydrograph Model (ReFH2) | Wallingford HydroSolutions Pty Ltd | Link |
| River Modelling Guide | WAPUG (Wastewater Planning Group) | Link |
| Integrated Urban Drainage Modelling | WAPUG (Wastewater Planning Group) | Link |
If there are modelling guideline documents not listed that you find useful and would like to share with the TUFLOW community, please email the details to support@tuflow.com.