Tutorial M10 002 Check Files QGIS

From Tuflow
Jump to navigation Jump to search

Introduction

QGIS is used to import the check files and review the dam break.

Method

This tutorial introduces:

Review the check files:

  1. Open the following files from the Module_10\TUFLOW\check folder:
    • M10_5m_002_vzsh_zpt_check_P.shp
  2. Use the 'Apply TUFLOW Styles to Open Layers'.
  3. The vzsh_zpt_check file contains information on the elevation points that change over time, elevation change, final elevation and trigger conditions.
    Note: [35;70] is a unique identifier of the grid cell that the water level trigger point is contained within. It comes from the the grd_check layer where, in this example, the attribute 'n' is 35 and 'm' is 70 for the cell containing the trigger.

    Animation M10 002 Check 01.gif


Conclusion

  • The topographic modifications representing the dam break were inspected.


Up
Go-up.png Back to Module 10 Main Page
Retrieved from "https://wiki.tuflow.com/w/index.php?title=Tutorial_M10_002_Check_Files_QGIS&oldid=32950"