Tutorial M10 002 Check Files QGIS GPKG

Introduction

QGIS is used to import the check files and review the dam break.

Method

This tutorial introduces:

• _vzsh_zpt_check_P

Review the check files:

1. Open the file, either:

   • Within the QGIS Browser Panel, navigate to Module_10\TUFLOW\check\M10_5m_002_Check.gpkg and double click the following layer, or

   • M10_5m_002_vzsh_zpt_check_P

   • In File Explorer, navigate to the Module_10\TUFLOW\check folder, drag and drop the M10_5m_002_Check.gpkg into the QGIS workspace and select the layer above.

2. Use the 'Apply TUFLOW Styles to Open Layers'.
3. Use the 'Apply GPKG Layer Names'.
4. The vzsh_zpt_check file contains information on the elevation points that change over time, elevation change, final elevation and trigger conditions.
   Note: [35;70] is a unique identifier of the grid cell that the water level trigger point is contained within. It comes from the the grd_check layer where, in this example, the attribute 'n' is 35 and 'm' is 70 for the cell containing the trigger.
   
   
   
   

Conclusion

• The topographic modifications representing the dam break were inspected.

Up
Back to Module 10 Main Page