Difference between revisions of "QGIS SWMM Outfalls Fix Multiply Connected Links"

From Tuflow
Jump to navigation Jump to search
Line 1: Line 1:
 
== Introduction ==
 
== Introduction ==
This tool creates a conduit extension to eliminate the SWMM error with multiple links connected to the same outfall node. This is a common issue when converting ESTRY models for use in TUFLOW-SWMM (see the <u>[[QGIS SWMM Convert ESTRY Layers To SWMM|Convert - ESTRY layers to SWMM]]</u> processing tool). This tool takes an existing GeoPackage file and creates a new GeoPackage file that contains the channel extensions. The newly created extension channel is always an open rectangular channel with the provided attributes. The generated channels may need to be modified to match the real world geometry at the location.
+
This tool creates a conduit extension to eliminate the SWMM error with multiple links connected to the same outfall node. This is a common issue when converting ESTRY models for use in TUFLOW-SWMM.
 +
 
 +
For each multiply connected outfall, this tool generates a new conduit channel and a corresponding junction node. The new junction node is positioned where the initial outfall node was multiply connected. The new conduit channel is then connected to this junction node and the outfall node is relocated to the outlet of the new channel. <br>
 +
This tool takes the existing GeoPackage file (with the multiply connected links) and creates a duplicate. The new GeoPackage is then updated with the channel extension(s).
 +
 
 +
The newly created extension channel is always an open rectangular channel with the provided attributes. The generated channels may need to be modified to match the real world geometry at the location.
 
<br>
 
<br>
  

Revision as of 14:34, 30 January 2024

Introduction

This tool creates a conduit extension to eliminate the SWMM error with multiple links connected to the same outfall node. This is a common issue when converting ESTRY models for use in TUFLOW-SWMM.

For each multiply connected outfall, this tool generates a new conduit channel and a corresponding junction node. The new junction node is positioned where the initial outfall node was multiply connected. The new conduit channel is then connected to this junction node and the outfall node is relocated to the outlet of the new channel.
This tool takes the existing GeoPackage file (with the multiply connected links) and creates a duplicate. The new GeoPackage is then updated with the channel extension(s).

The newly created extension channel is always an open rectangular channel with the provided attributes. The generated channels may need to be modified to match the real world geometry at the location.

Usage

This tool, Outfalls - Fix Multiply Connected Links, can be found in the QGIS processing toolbox panel under TUFLOW >> SWMM. To open the Processing Toolbox panel, navigate to 'Processing' in the menubar and select 'Toolbox'.

Open processing toolbox.png

Parameters

  1. GeoPackage in TUFLOW-SWMM Format: The input GeoPackage file to be updated.
  2. Channel extension length: As the name suggests.
  3. Channel extension width: As the name suggests.
  4. Channel extension maximum depth: As the name suggests.
  5. Channel extension z-offset for new downstream outlet elevation: The difference between the elevation of the upstream node and downstream node (the outlet). This difference is used to determine the elevation of the new downstream outlet.
  6. Channel extension roughness coefficient: The Manning's n value for the channel extension.
  7. GeoPackage output filename: Determines the location and filename of the output GeoPackage.


Outfalls Fix Multiply Connected Links Dialog a.png


Up
Go-up.png Back to TUFLOW QGIS Plugin Main Page