Deletion log

Below is a list of the most recent deletions.

(newest | oldest) View (newer 100 | older 100) (20 | 50 | 100 | 250 | 500)

01:39, 16 March 2024 ElizaCollison talk contribs deleted page Hardware Benchmarking Topic HPC CPU Scaling (content was: " Page Under Construction =Introduction= TUFLOW HPC can run on either CPU or GPU hardware. When running CPU hardware multiple CPU cores can be utilised as the calculations are performed in parallel. When using multiple cores, at each timestep there needs to be a transfer of information between CPU cores. This adds an overhead and means that the scaling is never linear. For example, running on two cores is not twice a...")
01:38, 16 March 2024 ElizaCollison talk contribs deleted page Hardware Benchmarking Topic Classic vs HPC (content was: " Page Under Construction =Introduction= This page discusses the differences in runtimes and also hardware requirements between TUFLOW Classic and TUFLOW HPC simulations. =Differences In Solution= TUFLOW Classic and TUFLOW HPC are both quite different in their use of hardware. TUFLOW classic can only use a single CPU core / thread. This is largely due to the implicit nature of the solution scheme. For more information...")
10:44, 6 February 2024 Chris Huxley talk contribs deleted page XPSWMM to TUFLOW-SWMM Draft (content was: "= Introduction = This Wiki page outlines recommended steps for conversion of an XPSWMM model to TUFLOW. XPSWMM is a flood and urban stormwater drainage modeling software developed by Autodesk (previously Innovyze and XP Solutions). The XPSWMM solution uses EPA SWMM for its 1D calculations, dynamically linked to TUFLOW for its 2D calculati...", and the only contributor was "Pavlina Monhartova" (talk))
10:53, 1 February 2024 Chris Huxley talk contribs deleted page File:XPSWMM Culvert Inlet.JPG (Deleted old revision 20240201005346!XPSWMM_Culvert_Inlet.JPG)
10:52, 1 February 2024 Chris Huxley talk contribs deleted page File:XPSWMM Culvert Inlet.JPG (Deleted old revision 20240201005235!XPSWMM_Culvert_Inlet.JPG)
11:25, 29 January 2024 Abigail.lillo talk contribs deleted page HPC Features (archived)
16:21, 16 January 2024 Emilie Nielsen talk contribs deleted page QGIS SWMM Integrity Make Node Names Unique (content was: "== Introduction == This tool adds a suffix (.#) to duplicately named SWMM features. SWMM features must be uniquely named to avoid errors when running the simulation. == Usage == This tool, '''Integrity - Make node names unique''', can be found in the QGIS processing toolbox panel under TUFLOW >> SWMM. To open the Processing Toolbox panel, navigate to 'Processing' in the menubar and select 'Toolbox'. File:open_processing_toolbox.png === Parameters === <ol...")
14:10, 4 January 2024 Pavlina Monhartova talk contribs deleted page Hydraulics of Bridge Waterways (content was: " PAGE UNDER CONSTRUCTION This page introduces widely referenced modelling approaches from Hydraulics of Bridge Waterways(FHA, 1987) = Form Loss Coefficient of Bridge Piers = "Figure 7 Incremental backwater coefficient for piers" from Hydraulics of Bridge Waterways is one of the most widely applied metho...", and the only contributor was "ShuangGao" (talk))
14:10, 4 January 2024 Pavlina Monhartova talk contribs deleted page Integrity Tool Empty Geometry Check (content was: " The empty geometry tool loops through the inputs file and identifies any features that have an empty or NULL geometry. Should any null geometries be encountered than there is an option to automatically delete those features. <ol> <li> Navigate to the bottom of the 1D integrity tool and select the ‘Empty Geometry’ tab. Once selected click ‘Run’ to ini...", and the only contributor was "Tuflowduncan" (talk))
14:04, 4 January 2024 Pavlina Monhartova talk contribs deleted page Tute M01 Active Areas ArcTUFLOW (content was: "== Introduction == This page details the method for using ArcMap to set an active model area. This page uses the ArcTUFLOW toolbox. Please see Active Areas Arc (old) if not using the toolbox. For more information on the toolbox, please see ArcTUFLOW toolbox. == Method == When working with GIS layers for TUFLOW we will typically work from the template (empty) GIS files created in the previous step. These fi...")
14:02, 4 January 2024 Pavlina Monhartova talk contribs deleted page Tute M01 Active Areas Arc ArchiveTUFLOW (content was: "== Introduction == This page details the method for using ArcMap to set an active model area. == Method == <li>Add the '''2d_code_empty_R.shp''' template file from the '''TUFLOW\model\gis\empty''' folder. In the Layers Table of Contents right click on this layer and select ''Data >> Export Data''. Save this shape layer as '''2d_code_M01_002_R.SHP''' in the...", and the only contributor was "ElizaCollison" (talk))
13:58, 4 January 2024 Pavlina Monhartova talk contribs deleted page Tute M01 GIS Based Zpt Inspection (content was: "=Introduction= This page details the GIS based inspection of Zpts, this is an alternative to the direct input of the elevation model described in the module 1 tutorial model. This approach is described in the following software packages: * MapInfo with Vertical Mapper * MapInfo with Encom Discover * ArcGIS with Spatial Analyst * Quantum GIS (QGIS) =Method= <ol> To inspect the Zpts in your GIS package, follow these steps. <li>To set all 2D ce...")
13:50, 4 January 2024 Pavlina Monhartova talk contribs deleted page Tutorial M08 001 GeoPackage Database (content was: " Page Under Construction = Introduction = QGIS is used to create, import and view input data. = TUFLOW Project Re-Configuration = Re-configure the TUFLOW project to use and save empty files to the correct folder: <ol> <li>Go to Plugins > TUFLOW > Editing > Configure / Create TUFLOW Pr...", and the only contributor was "Emilie Nielsen" (talk))
13:45, 4 January 2024 Pavlina Monhartova talk contribs deleted page Tutorial M01 001 Results QGIS (content was: "Page Under Construction =Introduction= QGIS is used to view the 1D TUFLOW-SWMM time series results with the TUFLOW Viewer. For viewing of the 2D map results, see Module 1. =Method= Plot Time Series results through the pipe network: <o...", and the only contributor was "Angelos Livogiannis" (talk))
16:05, 3 January 2024 Pavlina Monhartova talk contribs deleted page SWMM Conduits Assign node fields (content was: "Page for Bo to complete {{Tips Navigation |uplink= Back to TUFLOW QGIS Plugin Main Page }}", and the only contributor was "Chris Huxley" (talk))
16:04, 3 January 2024 Pavlina Monhartova talk contribs deleted page SWMM ESTRY layers to SWMM (content was: "Page for Bo to complete {{Tips Navigation |uplink= Back to TUFLOW QGIS Plugin Main Page }}", and the only contributor was "Chris Huxley" (talk))
15:38, 3 January 2024 Pavlina Monhartova talk contribs deleted page SWMM Conduits Assign losses (content was: "Page for Bo to complete {{Tips Navigation |uplink= Back to TUFLOW QGIS Plugin Main Page }}", and the only contributor was "Chris Huxley" (talk))
09:46, 2 January 2024 Chris Huxley talk contribs deleted page File:TS01 GPKG ConfigureProject.PNG
09:43, 2 January 2024 Chris Huxley talk contribs deleted page File:TS01 GPKG ConfigureProject.PNG (Deleted old revision 20240101234300!TS01_GPKG_ConfigureProject.PNG)
09:51, 20 December 2023 Emilie Nielsen talk contribs deleted page File:Animation TS1 Check 01b.gif
09:51, 20 December 2023 Emilie Nielsen talk contribs deleted page File:Animation TS1 Check 02b.gif
09:51, 20 December 2023 Emilie Nielsen talk contribs deleted page File:Animation TS1 Check 03b.gif
14:06, 14 December 2023 Emilie Nielsen talk contribs deleted page File:Multiply connected links dialog.png
14:05, 14 December 2023 Emilie Nielsen talk contribs deleted page File:Multiply connected links dialog.png
14:05, 14 December 2023 Emilie Nielsen talk contribs deleted page File:Multiply connected links dialog.png (Deleted old revision 20231214040437!Multiply_connected_links_dialog.png)
12:24, 30 November 2023 Emilie Nielsen talk contribs deleted page TUFLOW SWMM (content was: "Page Under Construction =Introduction= =SWMM Tutorial Model=", and the only contributor was "Emilie Nielsen" (talk))
00:12, 30 November 2023 ElizaCollison talk contribs deleted page File:ArcGIS Run.png
20:09, 28 November 2023 ElizaCollison talk contribs deleted page ArcGIS TUFLOW Toolbox and Toolbar (moved 'ArcGIS TUFLOW Toolbar')
16:18, 28 November 2023 Chris Huxley talk contribs deleted page SWMM-TUFLOW Tutorial M01 (content was: "Page Under Construction = Introduction = In this module, a direct rainfall model is built. The tutorial demonstrates the Gridded Rainfall approach (spatiotemporal rainfall application) using a TUFLOW Rainfall Control File (TRFC) and the new SWMM functionalities. '''TUFLOW...", and the only contributor was "Angelos Livogiannis" (talk))
16:18, 28 November 2023 Chris Huxley talk contribs deleted page SWMM Tutorial Draft (content was: "Page Under Construction = Introduction = TUFLOW has supported 1D/2D dynamic coupling since its initial 2D solver development in 1989. Traditionally, 1D (1 Dimensional) linking and associated modelling has been applied using the ESTRY 1D solver. New in 2023, TUFLOW's 1D linking and solver options have been expanded to support EPA Storm Water Management Model (SWMM). As such, 1D pipe networks or 1D open channels ca...")
02:26, 31 October 2023 ElizaCollison talk contribs deleted page TUFLOW 1D Boundary Configuration Guidance (content was: "=Setting up a 1d_bc HQ boundary= There is no automatic way of creating a Head-Discharge curve for 1d_bc HQ boundaries. However, the condition to be satisfied for a normal depth is the Manning’s equation. So the HQ depth should be set up with elevation and the discharge calculated from Manning’s equation (including Area and Hydraulic Radius for each elev...", and the only contributor was "ElizaCollison" (talk))
23:10, 30 October 2023 ElizaCollison talk contribs deleted page File:Ta tables example.png (Deleted old revision 20231030131007!Ta_tables_example.png)
13:29, 23 October 2023 Emilie Nielsen talk contribs deleted page Naming Convention Draft (content was: "Page Under Construction __TOC__ The establishment of a sound naming convention is fundamental to the easy management of TUFLOW models and their associated files. A certain degree of flexibility regarding naming conventions is usually required due to differences between projects and users. However, early...", and the only contributor was "Emilie Nielsen" (talk))
01:45, 5 September 2023 Ellis Symons talk contribs deleted page File:Package model dialog.PNG (dont like how they look)
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M11 Draft (content was: "= Introduction = In this module, the creek is represented as a 1D open channel embedded into the 2D floodplain. Since the release of sub-grid sampling (SGS), 1D open channels may no longer be required if the DEM is at a fine resolution. If the DEM resolution is too coarse (for example in the below image), 1D open channel or quadtree may be required. Th...", and the only contributor was "Emilie Nielsen" (talk))
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M10 Draft (content was: "= Introduction = In this module, five ways of modelling dam break are introduced: :*Part 1: 2D Variable Geometry Time Trigger - the dam break begins at 1 hour and develops over 15 minutes. :*Part 2: 2D Variable Geometry Water Level Trigger - the dam break begins when the water level at a point is triggered. :*Part 3: 1D Piping Failure and 1D Dam Fail...", and the only contributor was "Emilie Nielsen" (talk))
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M09 Draft (content was: "= Introduction = In this module, event management is introduced. This is a powerful functionality running multiple event combinations (e.g. magnitude, duration, temporal patterns, climate change) using a single set of control files rather than creating a new set of control files for every simulation. This makes the management of the model easier, ensures c...", and the only contributor was "Emilie Nielsen" (talk))
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M08 Draft (content was: "= Introduction = In this module, scenario management is introduced. This is a powerful functionality running different simulations using a single set of control files rather than creating a new set of control files for every simulation. This makes the management of the model easier, ensures consistency between the simulations and better quality control. Without implementing scenario management, six TCFs and six TGC files are required to run this module, using scenario managemen...")
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M07 Draft (content was: "= Introduction = In this module, a quadtree mesh is used. To begin, watch the following video: :*[https://www.youtube.com/watch?v=2zrNwWUNTXE Quadtree Meshing in TUFLOW] A quadtree mesh is constructed by subdividing user selected standard cells into four smaller square cells. These smaller cells are then able to be further subdivided into four, and so on. Quadtree allows for larger cells in areas of flat terrain (eg. large flat floodplains) and smaller cells where eithe...")
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M06 Draft (content was: "= Introduction = In this module, a direct rainfall model is built. The tutorial demonstrates three ways of modelling rainfall for a direct rainfall approach. :*Part 1: Global Rainfall - apply uniform rainfall to all active cells. :*Part 2: Rainfall Polygons - apply rainfall to active cells within digitised polygons and losses within the materials layer. :*Part 3: Gridded Rainfall - apply rainfall temporally and spatially using a TUFLOW Rainfall Control File (TRFC). The GI...")
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M05 Draft (content was: "= Introduction = In this module, an integrated urban drainage network is represented. The GIS layers are: :*TGC layers: <ol><ol><li>2d_zsh: A layer used to modify Zpt elevations using points, lines and polygons. <li>2d_mat: A layer used to define the land use (material) types within the developmental area. </ol></ol> :*ECF layers: <ol><ol><li>1d_nwk: A layer used to define pipes and pits in 1D. </ol></ol> :*TBC layers: <ol><ol><li>2d_sa: A layer to define internal 2D...")
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M04 Draft (content was: "= Introduction = In this module, bridges are represented within the 2D domain. Topographic changes are made to cut through the road and a time series data output created to gain information on a range of hydraulic parameters of the bridge. The GIS layers are: :*TGC layers: <ol><ol><li>2d_lfcsh: A layer used for modelling 2D flow under and over bridges, pipes and other obstructions across the waterway. <li>2d_zsh: A layer used to modify Zpt elevations using points, lines...")
14:31, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M03 Draft (content was: "= Introduction = In this module, three culverts are added to better represent flow through embankments that fall on main flow paths. The GIS layers are: :*ECF layers: <ol><ol><li>1d_nwk: A layer used to define culverts in 1D. </ol></ol> :*TBC layers: <ol><ol><li> 2d_bc: A layer defining the locations of 1D/2D links. </ol></ol> '''Module 3 builds from the model created in Module 2. The completed Module 2 model is provided in the Module_03...")
14:30, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M02 Draft (content was: "= Introduction = In the first part of this module, breaklines are added to ensure that the key hydraulic controls are correctly represented in the 5m cell size model. The second part involves simple and more complex development topographic modifications. The GIS layers are: :*TGC layers: <ol><ol><li>2d_zsh: A layer used to modify Zpt elevations using points, lines and polygons.</li> <li>2d_mat: A layer used to define the land use (material) types within the developmen...")
14:30, 15 August 2023 Emilie Nielsen talk contribs deleted page Tutorial M01 Draft (content was: "= Introduction = Read the Tutorial Model Introduction before starting this tutorial. It outlines programs requiring installation and provides the tutorial dataset download link. In this module, a fully two-dimensional (2D) model is built with a number of TUFLOW control files and Geographic Information System (GIS) layers. The TUFLOW control files are: :* TUFLOW Simulation Control File (TCF) :* TUFLOW Geometry Control File (TGC)...")
15:39, 15 June 2023 Emilie Nielsen talk contribs deleted page Tutorial Troubleshooting QGIS GPKG (content was: " Page Under Construction = Introduction = This troubleshooting page contains common errors and steps to follow when investigating models. =Common Errors= ===Unsaved Control Files=== When changes are made in the control files and the files are not saved, errors occur. <ol> <li>Check all s...", and the only contributor was "Emilie Nielsen" (talk))
11:36, 15 June 2023 Emilie Nielsen talk contribs deleted page Tutorial M08 002 Check Files QGIS GPKG (mistake)
15:26, 8 June 2023 Emilie Nielsen talk contribs deleted page File:M05 GPKG ConfigureProject.PNG
15:25, 8 June 2023 Emilie Nielsen talk contribs deleted page File:M05 GPKG ConfigureProject.PNG
11:54, 2 June 2023 Emilie Nielsen talk contribs deleted page TUFLOW Check Files Draft
14:11, 1 June 2023 Emilie Nielsen talk contribs deleted page File:Animation M01 GPKG Check Vectors 02.mp4
14:10, 1 June 2023 Emilie Nielsen talk contribs deleted page File:Animation M01 GPKG Check Vectors 02.mp4
18:45, 26 May 2023 Professional Wiki talk contribs deleted page Test Page (content was: "{{Video |name=Animation_M01_Boundary_01b_test2.mp4 |width=1274 }}", and the only contributor was "Professional Wiki" (talk))
01:04, 26 May 2023 Professional Wiki talk contribs deleted page Test Page (Author request: content was: "700px 600px 500px", and the only contributor was "Professional Wiki" (talk))
14:08, 25 May 2023 Emilie Nielsen talk contribs deleted page File:Animation M01 Boundary 02b test.mp4
11:52, 25 May 2023 Emilie Nielsen talk contribs deleted page Mp4 test (content was: "= Testing Mp4 uploads = border|center|frameless|1274x1274px ", and the only contributor was "Emilie Nielsen" (talk))
22:07, 15 May 2023 Professional Wiki talk contribs deleted page Test Page (Author request: content was: "Test", and the only contributor was "Professional Wiki" (talk))
22:06, 15 May 2023 Professional Wiki talk contribs deleted page MediaWiki:Common.css (Author request: content was: "CSS placed here will be applied to all skins: Prevent redirect information from showing up: #contentSub { display: none; }", and the only contributor was "Professional Wiki" (talk))
22:05, 15 May 2023 Professional Wiki talk contribs deleted page Index.php (Author request: content was: "#REDIRECT Main_Page", and the only contributor was "Professional Wiki" (talk))
17:01, 5 May 2023 Pavlina Monhartova talk contribs deleted page Empty Geometry Check (content was: " The empty geometry tool loops through the inputs file and identifies any features that have an empty or NULL geometry. Should any null geometries be e..." (and the only contributor was "Tuflowduncan"))
15:35, 5 May 2023 Pavlina Monhartova talk contribs deleted page New User Guide Education (content was: "There are a number of options available for University education and research purposes: * Teach TUFLOW using the licence free TUFLOW tutorials. * Teach..." (and the only contributor was "Chris Huxley"))
15:28, 5 May 2023 Pavlina Monhartova talk contribs deleted page Test Example (content was: "Bla bla bla" (and the only contributor was "Chris Huxley"))
15:28, 5 May 2023 Pavlina Monhartova talk contribs deleted page Test (content before blanking was: "Test content")
15:27, 5 May 2023 Pavlina Monhartova talk contribs deleted page Python (content was: "THIS PAGE IS CURRENTLY UNDER CONSTRUCTION =Introduction= Python is a popular free programming language that is wide..." (and the only contributor was "Ellis Symons"))
09:35, 13 April 2023 Pavlina Monhartova talk contribs deleted page TUFLOW Modelling Webinars (content was: "=Introduction= This page provides links to a series of webinars relevant to TUFLOW modelling. Demonstrations are provided for models using TUFLOW's na..." (and the only contributor was "Chris Huxley"))
15:46, 23 March 2023 Emilie Nielsen talk contribs deleted page File:M01 Configure Project v2.png (Deleted old revision 20230323054322!M01_Configure_Project_v2.png)
15:46, 23 March 2023 Emilie Nielsen talk contribs deleted page File:M01 Configure Project v2.png (Deleted old revision 20230323054353!M01_Configure_Project_v2.png)
15:45, 23 March 2023 Emilie Nielsen talk contribs deleted page File:M01 Configure Project v2.png (Deleted old revision 20230323054537!M01_Configure_Project_v2.png)
15:41, 23 March 2023 Emilie Nielsen talk contribs deleted page File:M01 Configure Project v2.png (Deleted old revision 20230323051824!M01_Configure_Project_v2.png)
15:41, 23 March 2023 Emilie Nielsen talk contribs deleted page File:M01 Configure Project v2.png (Deleted old revision 20230323054131!M01_Configure_Project_v2.png)
15:01, 23 March 2023 Emilie Nielsen talk contribs deleted page File:M01 Configure Project v2.png (Deleted old revision 20230323050035!M01_Configure_Project_v2.png)
00:31, 11 January 2023 Tuflowduncan talk contribs deleted page Scalgo Live Tips (Broken redirect: content was: "= Introduction = [https://scalgo.com/en-US/live-flood-risk SCALGO Live] is a cloud-based terrain analysis tool which provides an interactive..." (and the only contributor was "[[Special:Contributions/Tuflowdun...)
12:40, 9 January 2023 ElizaCollison talk contribs deleted page Tute SMS M01 HPC (content was: "TULFOW HPC and its GPU module was included in the 2017 release of TUFLOW (2017-09-AA and later). The TUFLOW SMS interface currently (Version 12.2) does..." (and the only contributor was "Chris Huxley"))
12:39, 9 January 2023 ElizaCollison talk contribs deleted page Tute SMS M01 2.5m (content was: "<ol> <li> Duplicate the TUFLOW Grid Map dataset. Rename the new dataset "TUFLOW grid 2.5m" 600px <li> Select Fea..." (and the only contributor was "Chris Huxley"))
12:37, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Zpt Check SMS (content was: "=Introduction= SMS can be used to view the Zpts by importing from the GIS file. However, the results directory contains a *.2dm file which contains the elevations at the cell corners (by default). This is sufficient for the purpose of ch...")
12:37, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Zpt Check QGIS (content was: "=Introduction= QGIS will be used to import the check files and view the final elevations in the 2D model. =Method= With the <tt>Write Check Files </tt> command specified, TUFLOW will output the elevations in the...")
12:36, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Zpt Check Arc (content was: "=Introduction= ArcMap will be used to import the check files and view the final elevations in the 2D model. =Method= With the <tt>Write Check Files </tt> command specified, TUFLOW will output the elevations in t...")
12:36, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Zpt Check MI (content was: "=Introduction= MapInfo will be used to import the check files and view the final elevations in the 2D model. =Method= With the <tt>Write Check Files </tt> command specified, TUFLOW will output the elevations in...")
12:35, 9 January 2023 ElizaCollison talk contribs deleted page View Results in QGIS (content was: " =Introduction= In this section we will look at post-processing the TUFLOW results so they can be imported and viewed in QGIS. We will bring 3D surfaces (as gridded datasets) as well as point and vector data (as region objects). =TUFLOW...")
12:34, 9 January 2023 ElizaCollison talk contribs deleted page View Results in QGIS with the TUFLOW Viewer (content was: "=Introduction= The QGIS TUFLOW Viewer replaces Crayfish and TUPLOT as the TUFLOW result viewer for QGIS for version 3.6 onwards. It allows for much larger datasets to be viewed and ana...")
12:32, 9 January 2023 ElizaCollison talk contribs deleted page View Results in ArcGIS (content was: "<ol> ==Introduction== In this section we will look at post-processing the TUFLOW results so they can be imported and viewed in ArcGIS. We will load 3D surfaces (as gridded datasets) as well as point and vector data (as region objects)....")
12:31, 9 January 2023 ElizaCollison talk contribs deleted page View Results in MapInfo (TUFLOW to GIS) (content was: "<ol> ==Introduction== In this section we will look at post-processing the TUFLOW results so they can be imported and viewed in MapInfo. We will bring 3D surfaces (as grid..." (and the only contributor was "Par"))
12:31, 9 January 2023 ElizaCollison talk contribs deleted page View Results in MapInfo (content was: " ==Introduction== MapInfo can be used to view both the scalar datasets (such as depths, levels and velocity magnitudes). These can directly be output from TUFLOW using Grid output format. ''For the old page which steps through the proc...")
12:30, 9 January 2023 ElizaCollison talk contribs deleted page View Results in SMS 11.1 (content was: " = Introduction = In this page we will look at viewing TUFLOW results using SMS 11.1. This allows us to step through each output time and watch the flood as it progresses through the catchment. We will look at both scalar and vector data...")
12:27, 9 January 2023 ElizaCollison talk contribs deleted page View Results in SMS 10.1 (content was: " = Introduction = In this page we will look at viewing TUFLOW results using SMS 10.1. This allows us to step through each output time and watch the flood as it progresses..." (and the only contributor was "Par"))
12:24, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Model Controls SMS (content was: "= TUFLOW Simulation = A TUFLOW simulation is comprised of a grid, feature coverages, and model parameters. We have created a grid and several coverages to use in TUFLOW simulations. SMS allows for the creation of multiple simulations eac...")
12:24, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Boundaries SMS (content was: "=Introduction= A TUFLOW simulation computes the water surface elevations and velocities within the model domain. This requires definition of the model domain (such as topography and materials) as well as external forces (boundary conditi...")
12:23, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Boundaries QGIS (content was: "== Introduction == This page details the method for using QGIS to create the GIS based boundary layer files. Once the GIS layers are setup (detailed in this page), these are linked to data using a boundary database, (the boundary databas...")
12:22, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Boundaries Arc (content was: " == Introduction == This page details the method for using ArcGIS to create the GIS based boundary layer files. Once the GIS layers are setup (detailed in this page), these are linked to data using a boundary database, (the boundary data...")
12:22, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Boundaries MI (content was: " == Introduction == This page details the method for using MapInfo to create the GIS based boundary layer files. Once the GIS layers are setup (detailed in this page), these are linked to data using a boundary database, (described in the...")
12:21, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Materials SMS (content was: "This section details the method for using SMS to create the GIS based material types (land use areas). Once the GIS layers are set up, surface roughness or bed-resistance values (e.g. Manning's n) are assigned to each of these land use a...")
12:20, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Materials QGIS (content was: "== Introduction == This page details the method for using QGIS to create the GIS based material types (land use areas). Once the GIS layers are setup (in this section), surface roughness or bed-resistance values (e.g. Manning's n) are as...")
12:20, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Materials Arc (content was: " == Introduction == This page details the method for using ArcMAP to create the GIS based material types (land use areas). Once the GIS layers are setup (in this section), surface roughness or bed-resistance values (e.g. Manning's n) are...")
12:19, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Materials MI (content was: "== Introduction == This page details the method for using MapInfo to create the GIS based material types (land use areas). Once the GIS layers are setup (in this section), surface roughness or bed-resistance values (e.g. Manning's n) are...")
12:19, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Active Areas Arc (content was: "== Introduction == This page details the method for using ArcMap to set an active model area. == Method == <li>Add the '''2d_code_empty_R.shp''' templ..." (and the only contributor was "Chris Huxley"))
12:18, 9 January 2023 ElizaCollison talk contribs restored page Tute M01 Active Areas Arc (1 revision restored)
12:17, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Active Areas SMS (content was: "The active and inactive areas of a TUFLOW model domain are set using cell codes. In SMS, the Cell codes can be specified either on the grid cell by cell, or by using BC coverages to define an active area of the model. ==Method== We will...")
12:16, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Active Areas QGIS (content was: "== Introduction == This page details the method for using QGIS to set an active model area. A preliminary model extent is provided for the tutorial model, this will be copied into a TUFLOW format file. == Method == <ol> <li>Load the '''...")
12:08, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Active Areas Arc (content was: "== Introduction == This page details the method for using ArcMap to set an active model area. == Method == <li>Add the '''2d_code_empty_R.shp''' template file from the '''TUFLOW\model\gis\empty''' folder. In the Layers Table of Content...")
12:08, 9 January 2023 ElizaCollison talk contribs deleted page Tute M01 Active Areas MI (content was: "== Introduction == This page details the method for using Mapinfo to set an active model area. == Method == <ol> <li> Import the '''2d_code_empty.mif''' template file from the '''tuflow\model\mi\empty''' folder, and save it as '''2d_cod...")

(newest | oldest) View (newer 100 | older 100) (20 | 50 | 100 | 250 | 500)

Deletion log

Navigation menu

Search