Difference between revisions of "TUFLOW Message 2334"
Rohan.king (talk | contribs) |
Rohan.king (talk | contribs) |
||
| Line 24: | Line 24: | ||
|prelink=[[TUFLOW_Message_2333|Message 2333]] | |prelink=[[TUFLOW_Message_2333|Message 2333]] | ||
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | |uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]] | ||
| − | |nextlink=[[TUFLOW_Message_2348|Message | + | |nextlink=[[TUFLOW_Message_2348|Message 2335]] |
}} | }} | ||
Revision as of 22:08, 8 July 2015
TUFLOW Message
ERROR 2334 - Reading ESRI Grid file or premature end of file.
Alternate Message
ERROR 2334 - Exceeded limit of rainfall grids in file
Message Type
ERROR
Description
This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:
ncols 2284
nrows 3916
xllcorner 0.0
yllcorner 0.0
cellsize 5.0
NODATA_value -9999
After the header information should follow the ncols x nrows of data. If the file is not in a similar format to the above, the file is most likely not in the correct format.
Suggestions
Error 2334 - Reading ESRI Grid file or premature end of file
Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:
Error 2334 - Exceeded limit of rainfall grids in file
There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.
| Up |
|---|
 2xxx Messages
|