Tuflow

Flood Modeller Tutorial Model: Difference between revisions

Browse history interactively
← Older edit
Content deleted Content added
VisualWikitext
Rachel (talk | contribs)
465 edits
 
(42 intermediate revisions by 6 users not shown)
Line 1:
=Introduction=
The objective of this Flood Modeller – TUFLOW model is to demonstrate the ability of TUFLOW to link to an external 1D scheme and the various methods available in which to create this link. It is designed to supplement existing documentation and assumes the user has some prior knowledge of both the Flood Modeller and TUFLOW software packages.
This tutorial model has been developed by BMT WBM with CH2MHillJacobs. Please post comments, requests and feedback to the [[Talk:FM Tutorial Model|Discussion Page]] or contact [mailto:support@tuflow.com support@tuflow.com].
 
=Requirements and Downloads=
Both TUFLOW hasand Flood Modeller have relatively modest system requirements for small models such as the tutorial model. However, larger and more complex models may have higher hardware requirements - in particular memory (RAM). TUFLOWBoth issoftware are available in both 32 and 64 bit versions.
==Hardware==
The tutorial model is designed to be small, to allow for quick simulation and load times. The tutorial model should run on any modern PC or laptop that is capable of running Windows XP7 or later. If you would like to complete the optional TUFLOW HPC steps utilising a GPU card then you will need access to a CUDA enabled NVidia graphics card.
==Software==
===TUFLOW===
 
This tutorial model has been constructed using the 2018 release of TUFLOW. The tutorial model may be simulated licence free using TUFLOW Build 2016-03-AC or later. This can be obtained from the [https://tuflow.com/downloads/#tuflow downloads section] of the TUFLOW website. TUFLOW Build 2016-03-AD or later must be used in order to take advantage of the free TUFLOW link for this tutorial model. <br>
Any build of TUFLOW can be used for this tutorial.<br>
However, the tutorial can only be run for free in TUFLOW build 2016-03-AD or later. This can be obtained from the [http://tuflow.com/Tuflow%20Latest%20Release.aspx downloads section] of the TUFLOW website. <br>
It is recommended that you use the latest release version of TUFLOW, both 32 bit and 64 bit versions are available. <br>
<br>▼
If using TUFLOW build 2016-03-AD or later, this tutorial model does not require a TUFLOW licence in order to be simulated, and no additional drivers should be required.<br>
<br>
Outside of the tutorial, 10 free links with Flood Modeller are allowed. This is useful for testing your own models and developing small sections of larger models.<br>
However, larger models with more links will require a [https://www.floodmodeller.com/en-gb/sales/pricing-and-licensing-options/tuflow/ link licence].<br>▼
 
===Flood Modeller===
VersionThis 4.2tutorial ormodel laterhas ofbeen Floodconstructed Modellerusing orversion later4.2 isof requiredFlood for this tutorial modelModeller. The latest versionThis can be downloaded from the [https://www.floodmodeller.com/en-gb/downloads/ Flood Modeller Website]. The tutorial model may be simulated licence free using Version 4.2 to 4.6. These versions of Flood Modeller contains the free TUFLOW link, which permits simulation of linked models with up to 10 links or the tutorial model. <br>
 
If using Version 4.2 or later, a license for Flood Modeller or the TUFLOW link is not required to simulate this tutorial model.
▲However, largerLarger models with more links will require a [https://www.floodmodeller.com/en-gb/sales/pricing-and-licensing-options/tuflow/ link licence]. A licence is also required is you intend to run the model in Flood Modeller 5 or later<br>
 
===GIS Software===
Line 28 ⟶ 23:
*QGIS
*ArcGIS
*Flood Modeller
 
=Module Data=
All data to complete the tutorial has been provided, including a digital elevation model (DEM), aerial photography and a complete Flood Modeller model.<br> Data for this tutorial is provided in a variety of different GIS compatible formats. Download the dataset that matches the GIS software you are using:
*[https://downloads.tuflow.com/_archive/TUFLOW/Tutorial_Model/FMT_Tutorial_QGIS.zip QGIS Data Download]
The required data to build the model, as well as the completed version for your reference is available for download on the [http://www.tuflow.com/Tuflow%20Tutorial%20Models.aspx TUFLOW website].<br>
*[https://downloads.tuflow.com/_archive/TUFLOW/Tutorial_Model/FMT_Tutorial_Data_MapInfo.zip MapInfo Data Download]
*[https://downloads.tuflow.com/_archive/TUFLOW/Tutorial_Model/FMT_Tutorial_Data_ArcGIS.zip ArcGIS Data Download]
 
=Recommended Reading=
The aim of this tutorial is to demonstrate the steps undertaken to build, review and visualise the results of a linked Flood Modeller – TUFLOW model. It assumes that the user has a good understanding of both the 1D component of Flood Modeller and the 1D and 2D components of TUFLOW. The following resources may be of use:
*[[Tutorial_ModelTutorial_Introduction | TUFLOW Tutorial Model]]
*[httphttps://docs.tuflow.com/Tuflow%20Documentation.aspxclassic-hpc/manual/latest/ TUFLOW User Manual]
*[https://www.floodmodeller.com/media/34731/isis_1d_quick_start_guide.pdf Flood Modeller 1D Quick Start Guide]
*[httphttps://help.floodmodeller.com/floodmodeller/docs Flood Modeller User Manual]
 
=Modules=
The tutorial is presented over a series of modules, with each module offering the opportunity to run the model and review the results. Each of the modules builds upon the previous iteration with models developed in the previous module made available.
New users are advised to undertake the modules in sequence, whilst more experienced users can skip to modules containing specific features of interest.
==Module 1: Linking Flood Modeller to TUFLOW==
The first tutorial module introduces the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model. To access this module of the tutorial please see this page: <u>[[Flood Modeller Tutorial Module01|Flood Modeller Tutorial Module 1]]</u>.<br>
<br>
From this tutorial you will learn how to link an existing Flood Modeller 1D model to a TUFLOW 2D domain.<br>
This tutorial is ideal for those starting to learn how to link Flood Modellder and TUFLOW.<br>
 
==Module 2: Linking Flood Modeller to ESTRY (x1DH)==
The second tutorial demonstrates the linking of an ESTRY pipe network to an existing Flood Modeller – TUFLOW linked model. <fontTo color="red">access COMINGthis module of the tutorial please see this page: SOON.</font><br>
[[Flood Modeller Tutorial Module02|Flood Modeller Tutorial Module 2]]. <br>
 
From this tutorial you will learn how to add a 1D pipe network and connect it to the representation of the watercourse created in Flood Modeller and link it to the TUFLOW representation of the floodplain created as part of [[Flood Modeller Tutorial Module01|Flood Modeller Tutorial Module 1]]. This tutorial is ideal for those who would like to learn more about the interaction of TUFLOW with Flood Modeller including the simulation of fully integrated drainage systems.
==Module 3: Linking Flood Modeller to ESTRY (x1DQ)==
 
The third tutorial demonstrates the linking of an existing Flood Modeller – TUFLOW model that outfalls to an ESTRY network. <font color="red"> COMING SOON.</font><br>
=Contact=
For comments, requests and feedback contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.<br>
For further training opportunities see <u>[https://tuflow.com/training/training-course-catalogue/ TUFLOW Training Catalogue]</u> and/or contact <u>[mailto:training@tuflow.com training@tuflow.com]</u>. <br>
 
▲<br>
{{Tips Navigation
|uplink=[[Main_Page| Back to Main Page]]
}}
Retrieved from "https://wiki.tuflow.com/Flood_Modeller_Tutorial_Model"