Flood Modeller Tutorial Module01 Provisional: Difference between revisions
Content deleted Content added
| (5 intermediate revisions by 2 users not shown) | |||
Line 188:
<li>Read in the GIS layers used to create Water Level Lines along the Flood Modeller component of the model (optional).
<li>Add a reference to the ESTRY Control File.
<li>Update references to the TBC and TGC.
</ul>The following steps outline how to apply these updates:
# In the \FMT_Tutorial\FMT_M01\TUFLOW\runs folder, save a copy of the TUFLOW file created as a part of [[Tutorial_M02 |Module 2]] ('''M02_5m_001.tcf''') as '''FMT_M01_001.tcf.'''
Line 197:
#Add commands to read in an ESTRY Control File which contains references to some of the culverts present on the floodplain:<br><font color="blue"><tt>ESTRY Control File</tt></font> <font color="red"><tt>== </tt></font>..\model\FMT_M01_001.ecf <font color="green"><tt>!Reference the ESTRY Control File </tt></font>
#Update the links to the Geometry control file, the Boundary Condition control file and the bc_dbase file:<br><font color="blue"><tt>Geometry Control File</tt></font> <font color="red"><tt>== </tt></font>..\model\FMT_M01_001.tgc <br><font color="blue"><tt>BC Control File</tt></font> <font color="red"><tt>== </tt></font>..\model\FMT_M01_001.tbc <br><font color="blue"><tt>BC Database</tt></font> <font color="red"><tt>== </tt></font>..\bc_dbase\bc_dbase_FMT_M01.csv
</ol>
This concludes the changes needed to be made to the TCF.
Line 216 ⟶ 212:
<li> Right click 'Event Data' and select 'Add Item'. Navigate to '''\FMT_Tutorial\FMT_M01\Flood_Modeller\IED''' and load the '''FMT_Inflows.IED'''.</li>
<li> On the 'Simulation' tab, click New 1D Simulation. Save the file when prompted in the '''\FMT_Tutorial\FMT_M01\Flood_Modeller\IEF''' folder as '''FMT_M01_001.ief'''</li>
<li> On the 'Files' Tab of the simulation window, set the following parameters:</li>
*Event Title: FMT_M01_001
Line 240 ⟶ 236:
[[File:Ief tcf.png|frameless|500x500px]]
</li></li><li></li><li> Save the Scenario Data and run the Flood Modeller simulation. </li>{{Video|name=Setting up FMP IEF Simulation File.mp4 |width=1123}}</ul>
= Review Check Files =
=== Review Boundaries and 1D/2D Links ===
From the TUFLOW\check\2d\ folder open within QGIS:
*FMT_M02_001_1d_to_2d_check
*FMT_M02_001_sac_check
The _1d_to_2d_check layer highlights the location of all 1D/2D boundary links within the model. In this case it should show the HX boundaries that have been digitised along the river banks.
The _sac_check layer highlights the lowest 2d cells within the SA boundary polygon to which inflow is first distributed.
=== Review Bank Elevations ===
From the TUFLOW\check\2d\ folder open within QGIS:
*FMT_M01_001_zln_zpt_check_P
The _zln_zpt_check layer highlights the cells whose elevations have been modified by z lines to represent the bank crests of the watercourse.
= Review the Results =
| |||