Difference between revisions of "TUFLOW Message 2334"
Rohan.king (talk | contribs) |
|||
| Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
|tuflow_message=ERROR 2334 - Reading ESRI Grid file or premature end of file. | |tuflow_message=ERROR 2334 - Reading ESRI Grid file or premature end of file. | ||
| − | |alt_msg= | + | |alt_msg=ERROR 2334 - Exceeded limit of rainfall grids in file |
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:<br> | |message_desc=This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:<br> | ||
| Line 13: | Line 13: | ||
After the header information should follow the ncols x nrows of data. If the file is not in a similar format to the above, the file is most likely not in the correct format. | After the header information should follow the ncols x nrows of data. If the file is not in a similar format to the above, the file is most likely not in the correct format. | ||
| − | |suggestions=Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:<br> | + | |suggestions=<u>Error 2334 - Reading ESRI Grid file or premature end of file</u><br>Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:<br> |
*[[VM_Export_to_ASC| MapInfo with Vertical Mapper]] | *[[VM_Export_to_ASC| MapInfo with Vertical Mapper]] | ||
*[[Arc_Export_Raster_to_asc|ArcMap]] | *[[Arc_Export_Raster_to_asc|ArcMap]] | ||
*[[QGIS_Export_Raster_to_asc|QGIS]] | *[[QGIS_Export_Raster_to_asc|QGIS]] | ||
| + | <u>Error 2334 - Exceeded limit of rainfall grids in file</u><br> | ||
| + | There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear. | ||
|discussion_page=* [[Talk:TUFLOW Message 2334|Discuss Message 2334]] | |discussion_page=* [[Talk:TUFLOW Message 2334|Discuss Message 2334]] | ||
|link3='' | |link3='' | ||
Revision as of 21:57, 8 July 2015
TUFLOW Message
ERROR 2334 - Reading ESRI Grid file or premature end of file.
Alternate Message
ERROR 2334 - Exceeded limit of rainfall grids in file
Message Type
ERROR
Description
This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:
ncols 2284
nrows 3916
xllcorner 0.0
yllcorner 0.0
cellsize 5.0
NODATA_value -9999
After the header information should follow the ncols x nrows of data. If the file is not in a similar format to the above, the file is most likely not in the correct format.
Suggestions
Error 2334 - Reading ESRI Grid file or premature end of file
Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:
Error 2334 - Exceeded limit of rainfall grids in file
There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.
| Up |
|---|
 2xxx Messages
|