Revision as of 20:54, 13 May 2022 view source ElizaCollison (talk \| contribs) Bureaucrats, Administrators 3,894 edits →Results ← Older edit		Revision as of 20:55, 13 May 2022 view source ElizaCollison (talk \| contribs) Bureaucrats, Administrators 3,894 edits →Results Newer edit →
Line 251: <li>The file reports the time varying status of the pipe and dam failure, and the resulting flows and dimensions: :The dam failure is triggered by the percent completion of the pipe failure, it begins when the pipe failure ends. :The 'Flow Intact' column is flow overtopping the dam that occurs before the dam break, in this example the dam does not overtop. The 'Flow Failed' column is the flow during and after the dam break. <br> <ol>[[File:M10 003 Result 1d O PF 01a.png]]</ol><br> :*After ~~one~~approximately ~~hour~~1.5 hours the dam failure is 'Fully Open', the 'Breach Depth' is 7m20m, 'Top Width' is ~~15m~~25m, 'Bottom Width' is 1m1.9m.<br> <ol>[[File:M10_003_Result_1d_O DF 01a.png]]</ol><br> </ol>

Tutorial M10: Difference between revisions