Tuflow

TUFLOW CATCH Tutorial M01: Difference between revisions

Browse history interactively
← Older editNewer edit →
Content deleted Content added
VisualWikitext
Line 278:
 
===TUFLOW CATCH Log File (.catchlog)===
The first placefile to lookreview is in the TUFLOW CATCH Log File (.catchlog). The <tt><font color=blue>Log Folder</font><font color=red> == </font>log</tt> command in the .tcc controls where the .catchlog is written. <br>
Navigate to the '''Modelling\TUFLOWCATCH\runs\log''' folder and open the '''TC01_001.catchlog''' file in a text editor. It contains a summary of the TUFLOW CATCH simulation. The following are the key points to review: <br>
* '''Global Settings:''' The commands from the 'Global Settings' section of the .tcc are echoed here. Review these to confirm that the correct settings have been applied.<br>
:[[File: TC1_catchlog_01a.png]]<br>
* '''Simulation Configuration:''' The .catchlog outlines withwhich models have been used and what simulation configuration has been run. In this tutorial, the catchment hydraulic and pollutant export models have been applied, indicating a pollutant export configuration. <br>
:[[File: TC1_catchlog_02a.png]]<br>
* '''Run Status:''' At the end of the file, a message will confirm the simulation outcome.
Line 288:
::[[File: TC1_catchlog_03a.png]]<br>
:* If an issue occurred, the simulation will stop and an error message will be reported. An example error is shown in the image below.
::'''Note:''' AllEach TUFLOW CATCH error messagesmessage havehas a corresponding wiki page. Thesethat pages containprovides further details onabout the error, and suggestions onfor how itto canfix bethe rectifiedissue. Refer to <u>[[5xxx_TUFLOW_Messages | 5xxx Messages]]</u> for a list of all TUFLOW CATCH related error messages.<br>
::[[File: TC1_catchlog_04a.png]]<br>
 
Line 295:
 
====TUFLOW Log File (.tlf)====
AsSince the catchment hydraulic model has beenis specified in this tutorial, review the TUFLOW Log File. The <tt><font color=blue>Log Folder</font><font color=red> == </font>log</tt> command in the .tcc controlsdefines where the .tlf is written<br>
Navigate to the '''Modelling\TUFLOWCATCH\runs\log''' folder and open the '''TC01_001_catchment_hydraulic.tlf''' file in a text editor.
* Scroll down to the bottom to 'Simulation Summary'. This includes information about the computation time, messages, volume calculations and mass error.
Line 302:
 
====TUFLOW FV Log File (.log)====
As theThe receiving model has not been specified in this tutorial, so no TUFLOW FV Log File (.log) has been created. The TUFLOW FV Log File will be reviewed in <u>[[TUFLOW_CATCH_Tutorial_M03#Reviewing_Model_Performance | TUFLOW CATCH Tutorial 03]]</u>.
 
=Conclusion=
Retrieved from "https://wiki.tuflow.com/TUFLOW_CATCH_Tutorial_M01"