Difference between revisions of "Tutorial M10 001 Check Files QGIS"

From Tuflow
Jump to navigation Jump to search
Line 5: Line 5:
 
= Method =  
 
= Method =  
 
This tutorial introduces:
 
This tutorial introduces:
:*[[Check_Files_2d_DEM_Z | _DEM_Z.flt]]
+
:*[[Check_Files_2d_DEM_Z | _DEM_Z.tif]]
 
:*[[Check_Files_2d_zsh_zpt | _zsh_zpt_check_P.shp]]
 
:*[[Check_Files_2d_zsh_zpt | _zsh_zpt_check_P.shp]]
 
:*[[Check_Files_2d_vzsh | _vzsh_zpt_check_P.shp]]
 
:*[[Check_Files_2d_vzsh | _vzsh_zpt_check_P.shp]]
Line 16: Line 16:
 
<ol>
 
<ol>
 
<li>Open the following files from the '''Module_10\TUFLOW\check''' folder:
 
<li>Open the following files from the '''Module_10\TUFLOW\check''' folder:
:*'''M10_5m_001_DEM_Z.flt'''
+
:*'''M10_5m_001_DEM_Z.tif'''
 
:*'''M10_5m_001_zsh_zpt_check_P.shp'''
 
:*'''M10_5m_001_zsh_zpt_check_P.shp'''
 
:*'''M10_5m_001_vzsh_zpt_check_P.shp'''
 
:*'''M10_5m_001_vzsh_zpt_check_P.shp'''

Revision as of 14:22, 14 April 2023

Introduction

QGIS is used to import the check files and review the dam break.

Method

This tutorial introduces:

Review the check files:

  1. Open the following files from the Module_10\TUFLOW\check folder:
    • M10_5m_001_DEM_Z.tif
    • M10_5m_001_zsh_zpt_check_P.shp
    • M10_5m_001_vzsh_zpt_check_P.shp
    • M10_5m_001_sh_obj_check_R.shp
    • M10_5m_001_grd_check_R.shp
    • M10_5m_001_bcc_check_R.shp
    • M10_5m_001_sac_check_R.shp
  2. Use the 'Apply TUFLOW Styles to Open Layers'.
  3. The DEM_Z grid shows the final elevations (at time 0) used for the model calculations. The elevation changes due to the dambreak are inspected in the Results section.
  4. The zsh_zpt_check file contains the Zpts modified by the 2d_zsh layers with updated elevation, change in elevation and source layer. The Shape_Width attribute is specified the same as the cell size, a thick breakline is used with entire cells being modified. The TUFLOW style colour codes the symbols based on the amount raised, or lowered.

    Animation M10 001 Check 01a.gif

  5. The vzsh_zpt_check file contains information on the elevation points that change over time, elevation change, final elevation and trigger conditions.
  6. The sh_obj_check file displays the TIN triangles created by TUFLOW during the model initialisation and is useful to review for all merge polygons.

    Animation M10 001 Check 02.gif

  7. The grd_check is the 2D grid defined by the 2d_code layer and contains a region object for each cell with attributes, e.g. the IWL.

    Animation M10 001 Check 03.gif

  8. The sac_check contains information on the lowest cells for each SA boundary region. The upstream 2d_bc QT inflow was replaced with a 2d_sa inflow.
  9. The bcc_check contains information on the 2D boundaries, it shows the cells conveying water out of the model selected by the 2d_bc HQ type boundary (based on a slope).

    Animation M10 001 Check 04a.gif


Conclusion

  • The topographic modifications representing the dam wall, dam break and initial water level were inspected.


Up
Go-up.png Back to Module 10 Main Page