Tutorial Module05 Archive: Difference between revisions

* Create separate control files for each simulation; or

* Run multiple simulations from the same control file (.tcf) using simple logic statements

<ol>

<li>Save a copy of the TUFLOW Control File from module 4 ('''M04_5m_001.tcf''') as '''M05_5m_~s1~_001.tcf'''.<br>

If the TUFLOW simulation fails to start TUFLOW will output the error in a number of locations. Firstly, check the Console Window or the TUFLOW Log File (.tlf) (located in the '''TUFLOW\runs\log\''' folder with the name '''M05_5m_001.tlf'''). This file can be opened in a text editor and the error is generally located at the end of the file. You can however search for "Error" if you can not see the error. In most cases there is also a spatial location for the error message (if the error reported in the log file is prefixed by XY:). To check the location of the geographic errors, open the '''M05_5m_001_messages.mif''' or '''M05_5m_001_messages_P.shp''' file in your GIS package.<br>

<br>

 

*[[Save_Date_Error_Archive|Save date of .tab file is later than .mif or .mid]]

= Advanced - HPC Solver (Optional) =

This section introduces how to run the model using TUFLOW’s HPC (Heavily Parallelised Compute) solver with scenario control. It is much more convenient to select the model solver using scenario control than how it was done in the previous tutorials, because you only need to create one .tcf file for both the HPC and/or Classic simulations.

 

==Model Setup==

==Results==

Using the methods described above in the <u>[[Tutorial_Module01_Archive#Viewing_Results | Viewing Results]]</u> section of Module 1.

* View the results in your preferred package.

Do the logs and results appear different to the TUFLOW Classic simulation?

</ol>

<br>

</ol>