Search results
Jump to navigation
Jump to search
- ...[[Module1_test_Archive#Define_the_Materials_.28Surface_Roughness.29|Module 1]].<br> ...the figure below. Leave the remaining larger polygon with a Material ID of 1.<br>2 KB (339 words) - 10:07, 9 January 2023
- *<u>[[FMA Challenge 1 (1D-2D linked)|Challenge 1]]</u>: An urban environment with the main channel concrete lined with numer ...thin a week and ran for various scenarios for all three challenges. Models 1 and 3 were 1D/2D linked models, with Model 3 including some scenarios for s2 KB (317 words) - 14:51, 27 June 2022
- <li>[[Manhole_Simple_Loss_Example#Example 1: Single Incoming/Outgoing Pipe with No Incoming Angle or Drop|Single Incomi ==Example 1: Single Incoming/Outgoing Pipe with No Incoming Angle or Drop==10 KB (1,689 words) - 23:33, 26 May 2021
- * NetCDF Data Type - This is 1 for <u>[[TUFLOW_NetCDF_Raster_Output_Format | "NC" raster output]]</u> and ...comment = 'Contains raster TUFLOW output, TUFLOW netcdf version: 1'3 KB (522 words) - 10:00, 23 November 2018
- :*f1: 1 :*f2: 1 <br>2 KB (380 words) - 09:28, 15 August 2023
- ...[[Module1_test_Archive#Define_the_Materials_.28Surface_Roughness.29|Module 1]].<br> ...the figure below. Leave the remaining larger polygon with a Material ID of 1.<br>2 KB (386 words) - 10:09, 9 January 2023
- * events = 1% AEP 1hr -> 12hr 1. Starting with the spatial distribution of the rainfall losses which is def5 KB (823 words) - 11:59, 7 March 2024
- | Z || -1 ...elevations within the polygon, i.e. within the polygon we are subtracting 1 m from all the elevations.</li>2 KB (358 words) - 09:43, 9 January 2023
- ...tt>Set Auto Terminate</tt></font> <font color="red"><tt>==</tt></font> <tt>1</tt> to include the entire grid, or use <font color="blue"><tt>Read GIS Aut530 bytes (83 words) - 09:17, 3 March 2023
- | Z || -1 ...elevations within the polygon, i.e. within the polygon we are subtracting 1 m from all the elevations.</li>2 KB (360 words) - 09:42, 9 January 2023
- |tuflow_message=ERROR 0412 - dbf field length is outside allowable range of 1 to 255 when writing dbf file.431 bytes (68 words) - 11:32, 22 December 2022
- ...[[Module1_test_Archive#Define_the_Materials_.28Surface_Roughness.29|Module 1]].<br> ...the figure below. Leave the remaining larger polygon with a Material ID of 1.<br>2 KB (423 words) - 10:08, 9 January 2023
- <li> For all polygons assign a 'f' attribute of '-1'. A cell code of '-1' deactivates all cells within the digitised code polygons. </li> ...lso be deactivated within a model by using a cell code of '0' instead of '-1'. A value of 0 removes these cells from the computation entirely which has2 KB (432 words) - 01:31, 25 April 2019
- ERROR 2475 - Invalid parameter number, expecting the 1st number between 1 and <>.<br>435 bytes (58 words) - 08:59, 3 March 2023
- <li> For all polygons assign a 'f' attribute of '-1'. A cell code of '-1' deactivates all cells within the digitised code polygons. </li> ...lso be deactivated within a model by using a cell code of '0' instead of '-1'. A value of 0 removes these cells from the computation entirely which has3 KB (443 words) - 00:25, 8 December 2018
- <li> For all polygons assign a 'f' attribute of '-1'. A cell code of '-1' deactivates all cells within the digitised code polygons. </li> ...lso be deactivated within a model by using a cell code of '0' instead of '-1'. A value of 0 removes these cells from the computation entirely which has3 KB (443 words) - 23:39, 7 December 2018
- <li>In MapInfo open the aerial photo and DEM layers as used in Module 1.</li> .... These are under the three roads, which were acting as dams in the module 1 results.6 KB (750 words) - 14:12, 6 January 2023
- |tuflow_message=WARNING 2812 - No quadtree nesting, largest nesting level = 1.455 bytes (71 words) - 09:57, 3 March 2023
- It must be in range 0 to N-1 where N is the number of supplied materials.465 bytes (74 words) - 10:15, 3 March 2023
- It must be in range 0 to N-1 where N is the number of supplied soils.450 bytes (74 words) - 10:16, 3 March 2023
- * Level 1 – Check for ellipses, rectangles, rounded rectangles and arcs (curved arc * Level 2 – All the level 1 checks as above plus checks for null and text objects.3 KB (433 words) - 11:29, 22 December 2022
- ...eo tutorial steps through <u>[[Tutorial_Module01_Archive | Tutorial Module 1]]</u> from the Wiki.<br> ===Part 1: Model Setup===6 KB (950 words) - 13:34, 5 April 2024
- ...viewing of the 2D map results, see <u>[[Tutorial_M01_Results_QGIS | Module 1]]</u>.<br> ...the simulation) at the location of the dam break. The dam break begins at 1 hour and takes 15 minutes to fully develop:<br>2 KB (259 words) - 11:10, 15 August 2023
- ...Window. The information window should show that the Code Feature is set to 1. This is shown in the image below. ...polygon to active (code = 1). Please return to the tutorial model module 1 page [[Tutorial_Module01_Archive#Discussion_on_Command_Order|here]].3 KB (487 words) - 12:43, 9 January 2023
- |1|| Pasture|| 0.06 ...</tt></font> <font color="green"><tt> ! Set every cell to a material ID of 1 (Pasture)</tt></font><br>3 KB (577 words) - 12:44, 9 January 2023
- |message_desc=2D cell is a boundary or inactive cell (Code -1 or 0), yet it has been assigned an internal boundary condition.389 bytes (62 words) - 10:53, 23 December 2022
- ...contains a region object for each active (cell code 1) or null (cell code -1) cell. A number of the output attributes are only written if certain model | Code||The cell code status. This is 1 for active cells and -1 for null cells that are included in the mesh. Refer to the TUFLOW Manual f4 KB (700 words) - 11:39, 2 June 2023
- ...2 results on primary axis, a template for 1 result on the primary axis and 1 result on the secondary axis... a template for n results on primary axis an2 KB (399 words) - 00:46, 30 November 2023
- It must be in range 0 to N-1 where N is the number of supplied boundary conditions (HT+HQ), or GT for gr544 bytes (87 words) - 10:15, 3 March 2023
- ...lygon is the second nested level digitised in the 2d_qnl layer (e.g. level 1 polygon divided into 4 cells). <li>'Optimise': the parent level 1 polygon is used to optimise the angle of the mesh.7 KB (1,237 words) - 14:25, 15 August 2023
- |tuflow_message=ERROR 3999 - nDevices requested less than 1.555 bytes (85 words) - 13:33, 11 April 2024
- ** D/M/YY - 1/1/21 or 25/12/21 ====Example 1: Using Dates====2 KB (373 words) - 14:14, 2 June 2021
- ...nually created nodes in the 1d_nwk layer and no 1d_channels. A minimum of 1 channel is required if using manually created 1D nodes.470 bytes (79 words) - 10:26, 23 December 2022
- |tuflow_message=ERROR 3048 - Wind/Wave Shallow Depth 2 must be > Depth 1.557 bytes (85 words) - 10:19, 3 March 2023
- :*f1: 1 :*f2: 1 <br>3 KB (485 words) - 13:26, 14 August 2023
- ...LOW version. For the 2011-09-AE version of TUFLOW this was increased from 1,000 to 100,000.454 bytes (66 words) - 16:19, 5 January 2024
- ...ile containing elevations. For this example the zpt_check file from module 1 of the TUFLOW tutorial model will be used, but the process can apply to any *Set the minimum number of points to 1;2 KB (301 words) - 06:08, 31 January 2015
- 1. Type 'cmd' into the start bar and press enter. This will bring up a black482 bytes (87 words) - 19:41, 7 July 2016
- ...need to be extended. Check the code polygon has active cells (attribute of 1).462 bytes (73 words) - 10:55, 23 December 2022
- <li>In ArcMap open the aerial photo and DEM layers as used in Module 1 (these are located in the '''Module_Data''' directory).</li> .... These are under the three roads, which were acting as dams in the module 1 results.7 KB (879 words) - 14:13, 6 January 2023
- ...01_Model_Controls_SMS_Archive#Material Sets|this section]] from the Module 1 tutorial to review how to do this. The TUFLOW 1D and 2D model parameters were set up previously in the Module 1 tutorial.<br>2 KB (344 words) - 15:05, 6 January 2023
- [[File:Tute M01 Saga 2d code 1.png|frame|none]] *Code = 14 KB (770 words) - 10:52, 5 January 2017
- <li>Click on the 'NULL' value and change the value to '1'. Click 'OK'. <br> ...ated setting the code value for cells inside the polygon to active (code = 1).3 KB (584 words) - 16:25, 14 August 2023
- ...to be used in the TUFLOW model, both options are outlined below. As Option 1 is straightforward and Option 2 is more involved, Option 2 is demonstrated == Option 1 (recommended) - Use Original Source Elevation Data Imported to XPSWMM ==6 KB (966 words) - 10:26, 1 March 2024
- ..._F attribute in the 1d_nwk is a multiplication factor and should be set to 1 (this may be adjusted as part of the calibration process).570 bytes (94 words) - 16:00, 22 December 2022
- ...abase (created in [[Module1_test_Archive#Define_Boundary_Conditions|Module 1]]) in the following steps of this module. The created boundary will be appl ...k these boundary names with an inflow using the bc_dbase created in Module 1. <br>2 KB (425 words) - 10:42, 9 January 2023
- ...t click on the polygon and select attributes. Set the "Code" attribute to 1. This will set the TUFLOW model to be active within this area.<br> ...polygon to active (code = 1). Please return to the tutorial model module 1 page <u>[[Module1_test#Discussion_on_Command_Order|here]]</u>.3 KB (589 words) - 14:03, 4 January 2024
- ...on number of the TUFLOW GPKG time series format and should be set to <code>1.0.0</code>. The table should have the following columns:<br> |1||M06_5m_003_swmm_ts_P||22||hours since 2020-01-01 00:00:00||1.0||Depth||Depth||m7 KB (924 words) - 20:49, 10 November 2023
- ...abase (created in [[Module1_test_Archive#Define_Boundary_Conditions|Module 1]]) in the following steps of this module. The created boundary will be appl ...k these boundary names with an inflow using the bc_dbase created in Module 1. <br>2 KB (433 words) - 10:41, 9 January 2023
- * Position '''X: 1.0, Y: 1.0''' = the top right corner of the plot window '''Position X:1, Y:1'''<br>2 KB (394 words) - 14:35, 2 June 2021