Revision as of 23:25, 18 September 2015 view source Rohan.king (talk \| contribs) 1,264 edits →Pump Attributes ← Older edit		Revision as of 23:31, 18 September 2015 view source Rohan.king (talk \| contribs) 1,264 edits →Pump Attributes Newer edit →
Line 7: =Pump Attributes= A pump needs to first be digitised in a 1d_nwke layer. The direction of the polyline must go from inlet to outlet as a pump is unidirectional <font color="majenta"><tt>(? Is that true)</tt></font><tt>.</tt> The attributes required for a pump in your 1d_nwke layer can be found within the 2015 TUFLOW manual.<br> In the 1d_nwk layer, the following attributes are required:<br> #ID = ID of the channel<br> #Type = "P"<br> #Len_or_ANA = Nominal length in m (only used for calculating nodal storage if UCS is on)<br> #US_Invert = Upstream invert level of the channel <br> #DS_Invert = Downstream invert level of the channel <br> #Inlet_Type = Used to specify the pump curve in the Depth Discharge database. <br> =2D-2D Configuration=

1D Pumps: Difference between revisions