Search results
Jump to navigation
Jump to search
Page title matches
- ...s, the check file does not exist, or the changes described in the tutorial model aren't in the check files. ...the .tlf for an input file name, for example, if breakline changes are not seen, search the .tlf to ensure the input file e.g. "2d_zsh_M03_thalweg" is bein761 bytes (133 words) - 15:04, 6 January 2023
Page text matches
- |tuflow_message=ERROR 0011 - TUFLOW Build different to that specified by Model TUFLOW Build == . ...="red"><tt>==</tt></font> command. For example, if <font color="blue"><tt>Model TUFLOW Build </tt></font> <font color="red"><tt>==</tt></font><tt> 2013-12-1 KB (203 words) - 09:15, 22 December 2022
- ...egistered tutorial model. Please remove "<font color="black"><tt>Tutorial Model </tt></font><font color="black"><tt>== </tt></font><font color="black"><tt> ...be used for valid tutorial models. If this command is added to any other model, this error message is generated.826 bytes (127 words) - 10:18, 18 July 2022
- |tuflow_message=Error 3500 - Could not allocate temporary memory (RAM) for processing SGS Grid. |alt_msg=ERROR 3500 - Could not allocate temporary memory (RAM) for processing HPC weir angle.509 bytes (73 words) - 11:47, 2 October 2023
- |tuflow_message=ERROR 2146 - Could not allocate memory (RAM) for "Inside Region == Method B". ...ate memory (RAM) for TIN Interpolation Work Arrays.<br> ERROR 2146 - Could not allocate temporary memory for GRID Band information.2 KB (413 words) - 11:51, 15 March 2024
- |tuflow_message=ERROR 2308 - Event <event name> not defined by "<font color="black"><tt>Define Event </tt></font><font color="b |message_desc=The event specified when simulating the model is not defined in the .tef event file.1 KB (196 words) - 14:25, 7 February 2023
- ...main. For example a boundary location must be within the model domain (if not a [[TUFLOW_Message_2001 | ERROR 2001]] is generated).<br> ...d are simply ignored. Therefore, it is not necessary to trim a DEM to the model domain.<br>1 KB (222 words) - 21:18, 21 December 2015
- |tuflow_message=ERROR 2219 - Trying to run a double precision model with a TUFLOW single precision .exe. |alt_msg=ERROR 2219 - Trying to run a single precision model with a TUFLOW double precision .exe.1 KB (201 words) - 14:12, 7 February 2023
- |tuflow_message=WARNING 2122 - Pit or node does not connect to an active cell within any 2D domain - 2D link ignored. ...nnect to an active cell within any 2D domain, therefore the link to the 2D model has been ignored.405 bytes (69 words) - 14:59, 2 February 2023
- |tuflow_message=ERROR 2782 - Stelling 2D ADI Implicit Scheme not available on GPU Hardware. ...an implicit solver which is not suited for GPU parallel computing, and is not yet coded to run on GPU hardware.725 bytes (117 words) - 09:09, 11 September 2023
- |tuflow_message=WARNING 2074 - SA object does not select any 2D cells (active or inactive). ...tres (ZC points), in the figure below the polygon highlighted in pink does not contain any cell centres and therefore this warning message will be returne780 bytes (131 words) - 11:57, 23 December 2022
- |tuflow_message=ERROR 2828 - Nesting polygon "a" not completely within level 1 polygon. |alt_msg=ERROR 2828 - Could not find any parent for nesting polygon "a"690 bytes (110 words) - 10:01, 3 March 2023
- |tuflow_message=ERROR 2001 - 2d_bc object is outside 2D model domain |alt_msg=ERROR 2001 - GIS Object is outside 2D model domain<br>926 bytes (155 words) - 10:51, 23 December 2022
- |tuflow_message=ERROR 2024 - Could not find a 1D node snapped to CN line. |message_desc=Could not find a 1D node snapped to 2d_bc connection (CN) line.1 KB (249 words) - 21:35, 4 March 2024
- |tuflow_message=WARNING 2038 - 2D connection at pit does not fall within an active cell in any 2D domain. |message_desc=Not used as of 2007-07-AD. 2D connection at pit does not fall within an active cell in any 2D domain.411 bytes (70 words) - 11:03, 23 December 2022
- |tuflow_message=ERROR 0015 - Variable "a" not defined. ...2D_CELL_SIZE” is used to set the 2D cell size of the model under different model scenarios.<br>1 KB (206 words) - 09:23, 22 December 2022
- ...package model functionality. For more information, please see the package model documentation in the <b><u>[https://downloads.tuflow.com/_archive/TUFLOW/Re ...mmand line syntax and the ini file (if required) and runs TUFLOW's package model tool (using the TUFLOW.exe). One additional piece of functionality is added2 KB (420 words) - 11:23, 17 January 2024
- |tuflow_message=ERROR 1322 - Could not write XMDF scalar data for 1D WLLs. Check disk space. ...nd amount of free disk space at the output location. Increment TCF and run model with new name.400 bytes (65 words) - 10:31, 23 December 2022
- |tuflow_message=ERROR 1323 - Could not write XMDF vector data for 1D WLLs. Check disk space. ...nd amount of free disk space at the output location. Increment TCF and run model with new name.400 bytes (65 words) - 10:31, 23 December 2022
- ...lem). There was insufficient motherboard RAM available to build or run the model. * Change to single precision, if not already.501 bytes (73 words) - 10:20, 3 March 2023
- |tuflow_message=Error 2061 - Could not find a CN connection snapped to the end of HX line. ...e must have as a minimum a connection at each of its ends, otherwise it is not clear how to transfer the water level gradient from the 1D domain.1 KB (252 words) - 23:07, 4 March 2024
- |tuflow_message=ERROR 0420 - Could not read projection line in .prj file. ...NG 0420 - Could not find PROJCS definition. Projection of .shp file might not be Cartesian.838 bytes (131 words) - 15:40, 4 January 2024
- Some or all non-spatial messages may not appear in _messages GIS layer. ...OW messages have a spatial location (for example a cell elevation that has not been assigned), however, some messages such as <u>[[TUFLOW_Message_1298]]</2 KB (273 words) - 11:10, 22 December 2022
- |tuflow_message=WARNING 2123 - Pit or node does not connect to an active cell within any 2D domain - 2D link ignored. |alt_msg=WARNING 2123 - Pit or node is not inside any 2D domain - 2D link ignored.497 bytes (84 words) - 15:00, 2 February 2023
- |alt_msg=ERROR 2839 - Split polyline should not have more vertexes than the original polyline ...ne features, for example when PO lines or part of PO lines are outside the model area for Quadtree models.533 bytes (85 words) - 16:03, 23 February 2024
- ...PC model running with a different timeseries of timesteps to the base case model. <br> ...are a result of the development features and not a result of change in the model timestep.<br>3 KB (555 words) - 15:31, 30 May 2022
- |tuflow_message=ERROR 2206 - ZC value not initialised (exceeds 99998m) |alt_msg=ERROR 2206 - ZU value not initialised (exceeds 99998m)<br>1 KB (174 words) - 14:05, 7 February 2023
- ...gon in 2d_qnl layer or 2d_code layer if level 1 polygon in 2d_qnl layer is not used.<br> Quadtree nesting polygons can only be within the model domain.1,012 bytes (166 words) - 10:02, 3 March 2023
- ...ied with "Defaults" command set to Pre 2017. Prior to 2017 TUFLOW HPC was not released. ...UFLOW HPC was only released in 2017. Setting Defaults prior to 2017 should not be used.440 bytes (64 words) - 09:48, 3 March 2023
- |tuflow_message=CHECK 2098 - Could not find a SC connection snapped to SH boundary. ...boundary should be linked to another 2D cell or 1D node via SC connection (not CN connection). This boundary is used for modelling pumps or other water ex696 bytes (117 words) - 12:31, 23 December 2022
- |message_desc=The data in the binary (xf) version is not the same precision as the simulation. For example the .xf file has been ge <font color="blue"><tt>Model Precision </tt></font> <font color="red"><tt>==</tt></font><br>1 KB (178 words) - 16:34, 5 January 2024
- |tuflow_message=ERROR 2132 - Node is duplicated or does not exist in external 1D domain. ...thin a GIS layer read into TUFLOW must be unique and match the external 1D model exactly.570 bytes (93 words) - 13:37, 7 February 2023
- ...be used to import the check files and view the final elevations in the 2D model. ...ed). This file contains the exact elevations in the model. However, this not so easy to visualise and TUFLOW also outputs a raster (gridded) dataset in2 KB (345 words) - 13:25, 5 April 2024
- ...ocessing Reporting Location Lines. Check "Read GIS Reporting Locations" is not in a 1D block or in .ecf file. ...This error is also triggered when reporting locations are used in 2D only model.576 bytes (98 words) - 11:39, 22 December 2022
- ...be used to import the check files and view the final elevations in the 2D model. ...the model. As this point vector layer contains thousands of points and is not easy to visualise TUFLOW also outputs a raster (gridded) dataset in the .fl2 KB (328 words) - 13:26, 5 April 2024
- |tuflow_message=ERROR 2104 - CoordSys line could not be found in "<font color="black"><tt>MI Projection</tt></font>" .mif file. ...OR 2104 - "<font color="black"><tt>Mi Projection</tt></font>" command does not support Shapefile projection (.prj) file as input.1 KB (150 words) - 12:33, 23 December 2022
- ...metimes, ensuring there are no open versions of the layer when running the model may resolve this issue. <br> ...iles]], and do not create empty template files manually or copy from other model folders.709 bytes (115 words) - 15:50, 4 January 2024
- ...the solution to remain stable. There are a variety of reasons that a HPC model may require these corrections:<br> * Poorly configured 1D/2D model interface1 KB (206 words) - 09:16, 3 March 2023
- |tuflow_message=ERROR 0046 - 1D Output Interval not specified.<br> |alt_msg=WARNING 0046 - 1D Output Interval not specified. Defaulting to every timestep.<br>1 KB (234 words) - 10:04, 22 December 2022
- |message_desc=The filepath is long and some features might not work correctly. ...g copy model (-c) or package model (-pm). Shorten the file path to run the model.<br>801 bytes (119 words) - 17:21, 19 April 2024
- |tuflow_message=ERROR 0252 – <file format> is not a supported GIS file format. |message_desc=The file format specified is not a recognised file format. For example:<br>910 bytes (153 words) - 11:09, 22 December 2022
- Firstly we will update the active 2D model area near the downstream boundary. ...odel with this configuration, water will not be able to leave enter the 1D model from the floodplain. The area is shown in the image below.</li>3 KB (536 words) - 09:10, 9 January 2023
- ...le (if not the TUFLOW model domain size is used). The syntax specified is not valid. It can be specified either as:<br>692 bytes (116 words) - 09:40, 3 March 2023
- ...Since '''Project--Options''' is already included in the HDR and RNF, it is not needed in the inlet curves INP file. <br> '''Note:''' The inlet usage GeoPackage does not need to be converted to a SWMM inp file. Since it contains only one layer,2 KB (325 words) - 13:29, 1 March 2024
- ...is is that the 1D network has changed between the model simulation and the model in which the restart file was written. ...estions=If the 1D network has been changed starting from a restart file is not possible and a new restart file needs to be created.590 bytes (100 words) - 16:01, 22 December 2022
- ...be used to import the check files and view the final elevations in the 2D model. ...the model. As this point vector layer contains thousands of points and is not easy to visualise TUFLOW also outputs a raster (gridded) dataset in the .fl2 KB (347 words) - 13:26, 5 April 2024
- Firstly we will update the active 2D model area near the downstream boundary. ...odel with this configuration, water will not be able to leave enter the 1D model from the floodplain. The area is shown in the image below.</li>3 KB (550 words) - 09:09, 9 January 2023
- ==I wish to use a PO line to monitor the flow exiting a model. Should I snap the PO line to the downstream boundary for this purpose?== Plot Output (PO) Q lines report model flow results for water crossing the digitised line. Computationally, TUFLOW2 KB (370 words) - 12:22, 3 October 2023
- |tuflow_message=ERROR 2423 - Could not close XMDF file. |suggestions=Close GIS software and run the model again.289 bytes (46 words) - 16:41, 16 August 2023
- ...ms to be shared between multiple simulations. A simulation also stores the model parameters used by TUFLOW.<br> ...nent from previous module and add new components. Doing this will keep the model from module01 unchanged.4 KB (617 words) - 14:29, 6 January 2023
- ...ese cell elevations that determine whether out of bank flooding occurs and not the left/right bank elevations with the Flood Modeller 1D cross-sections. ...<b>2d_bc_empty_P.shp</b> layer from within the FMT_tutorial\FMT_M01\TUFLOW\model\gis\empty folder.</li>2 KB (400 words) - 00:24, 8 December 2018
- ...ese cell elevations that determine whether out of bank flooding occurs and not the left/right bank elevations with the Flood Modeller 1D cross-sections. ...b>2d_bc_empty.mif</b> layer from within the '''FMT_tutorial\FMT_M01\TUFLOW\model\mi\empty''' folder.</li>2 KB (408 words) - 17:43, 25 April 2019
- Firstly we will update the active 2D model area near the downstream boundary. ...odel with this configuration, water will not be able to leave enter the 1D model from the floodplain. The area is shown in the image below.</li>3 KB (589 words) - 09:09, 9 January 2023
- |tuflow_message=ERROR 3517: Z Shape Route not supported yet in SGS. Please contact support@tuflow.com. |alt_msg=ERROR 3517: HX 2D BC not supported yet in SGS. Please contact support@tuflow.com.<br>2 KB (394 words) - 20:47, 9 April 2024
- |tuflow_message=ERROR 0038 - Could not apply <font color="blue"><tt>Set IWL </tt></font><font color="red"><tt>== < ...level at the downstream boundary. In this a varying HT boundary in the 2D model has been used and TUFLOW is unable to set the IWL automatically.1 KB (176 words) - 10:03, 22 December 2022
- |tuflow_message=ERROR 1299 - 1D timestep is not a multiple of timestep for Domain <domain number> ...he 1 second timestep is a multiple of the primary 5 second timestep, it is not a multiple of the 1.25 second timestep.825 bytes (145 words) - 10:25, 23 December 2022
- ...LOW domain. The bank elevations of the Flood Modeller 1D cross-sections do not control the spill. ...<b>2d_bc_empty_P.shp</b> layer from within the FMT_tutorial\FMT_M01\TUFLOW\model\gis\empty folder.</li>2 KB (415 words) - 23:24, 7 December 2018
- This tool loads all input shp files from a model simulation into a common ArcGIS Map window.<br> ...LOW_Run_TUFLOW_Simulation | ArcTUFLOW Run TUFLOW Simulation]] example does not provide an input (.tlf) to complete this example. This section relates to u894 bytes (145 words) - 15:55, 22 January 2018
- This page outlines some utilities that may be used to convert EPA SWMM model files into a format which is compatible with TUFLOW. The utilities are avai = Model Conversion Utility (swmm_to_gis.exe) =1 KB (210 words) - 11:16, 21 December 2023
- ...me scenarios for soil infiltration using the Green-Ampt method. Challenge Model 2 was also simulated using TUFLOW’s GPU solver and TUFLOW FV using a flex ...the tutorial models, please see this <u>[[Tutorial_Introduction | Tutorial Model Introduction]]</u> page. <br>2 KB (317 words) - 14:51, 27 June 2022
- |message_desc=The number of records in the .dbf (data file) does not match the number of objects in the GIS layer. I.e. there are 20 GIS object ...iles]], and do not create empty template files manually or copy from other model folders.766 bytes (127 words) - 15:35, 4 January 2024
- =Digital Terrain Model (DTM) Data= * The DTM data can be directly specified in the '2D Model Settings', or6 KB (966 words) - 10:26, 1 March 2024
- * CHECK 2098 - Could not find a SC connection snapped to SH boundary. ...r, in Module 14 the pump is transferring water to a location within our 2D model domain. Therefore we do in this instance require a connecting object to tra2 KB (442 words) - 12:02, 5 September 2012
- ...s, the check file does not exist, or the changes described in the tutorial model aren't in the check files. ...the .tlf for an input file name, for example, if breakline changes are not seen, search the .tlf to ensure the input file e.g. "2d_zsh_M03_thalweg" is bein761 bytes (133 words) - 15:04, 6 January 2023
- ...a 2D timestep of 4 seconds a 1D timestep of 1 or 2 seconds is ok, but 2.5 not valid. ...al to the 2D timestep or the smallest 2D timestep for a multiple 2D domain model.776 bytes (140 words) - 10:25, 23 December 2022
- ...TUFLOW HPC includes a handful of new features that are specific to it, and not applicable to TUFLOW Classic: ...run TUFLOW HPC models on CPU or GPU hardware, with the ability to run the model across several CPU cores or GPU cards for increased modelling speeds. CPU s7 KB (1,103 words) - 11:23, 29 January 2024
- ...all elevation commands (TIN, Grid, breakline etc.) have been read into the model. These are the elevations that are used in the computation. This check fi ...n (in particular when looking at the entire model or large sections of the model). The _zpt_check file is more suited to viewing the values at individual z2 KB (387 words) - 09:00, 18 December 2015
- ...on. This layer is input to TUFLOW to set the GIS coordinate system of the model. Before starting this ensure that you have the DEM and aerial photo open i ...'''Ensure that you add to the current mapper otherwise the new table will not be in the same GIS projection as the aerial photos and DEM'''2 KB (272 words) - 12:41, 9 January 2023
- If the XPSWMM model includes EPA SWMM hydrology, the hydrology components can be brought across ...SWMM Hydrology runoff method has been used in the XPSWMM model, review the model settings. In XPSWMM, from the top dropdown menu options, go to Configuratio4 KB (628 words) - 08:44, 2 April 2024
- ...) from the '''Module_01\Tutorial_Data''' folder to the '''Module_01\TUFLOW\model\gis''' folder. ...Load into QGIS the '''2d_mat_M01_001_R.shp''' from the '''Module_01\TUFLOW\model\gis''' folder. The material file is supplied with a QGIS style file (.qml)1 KB (181 words) - 16:26, 14 August 2023
- = Convert XPSWMM Model to Recommended TUFLOW Structure = ...ormation into a single folder, typically the '''2D\Data''' folder. This is not the standard TUFLOW structure. The standard structure used by the majority4 KB (646 words) - 02:18, 20 April 2024
- |tuflow_message=ERROR 3544 - Could not allocate memory (RAM) for HR Thin Z Line Output Adjustment. ...as enough RAM memory. Close unused task/software to free up memory. If the model produces this error with sufficient free CPU memory, please contact [mailto503 bytes (77 words) - 14:52, 29 June 2023
- ..._message=ERROR 1033 - No XS line data downstream of channel "XXXX". Could not interpolate cross-section properties. |alt_msg=ERROR 1033 - No XS line data upstream of channel "XXXX". Could not interpolate cross-section properties.1 KB (216 words) - 09:30, 9 January 2023
- == Load the TUFLOW model in QGIS == <li> Navigate to the location of the TUFLOW model and go to the '''TUFLOW\runs''' folder. Select the TCF.2 KB (277 words) - 10:41, 1 March 2024
- ...box. Please see [[Tute_M01_Active_Areas_Arc | Active Areas Arc (old)]] if not using the toolbox. For more information on the toolbox, please see [[ArcGi ...(from the TUFLOW\model\gis\empty\ folder and move the file into the TUFLOW\model\gis\ folder. The easiest way to do this is to use the ArcTUFLOW toolbox ''3 KB (589 words) - 14:03, 4 January 2024
- These messages occur are not specific to either the 1D or 2D model.<br> These messages are specific to the '''1D''' model domain.<br>1 KB (257 words) - 10:40, 23 January 2023
- If there are no objects in the layer or the file does not exist check that:<br> * The 1D model controls were entered correctly2 KB (414 words) - 14:22, 6 January 2023
- |tuflow_message=ERROR 1701 - 1D timestep not specified for GPU solver.<br> ...currently supported. All of the following, can enable 1D in a TUFLOW GPU model:<br>2 KB (281 words) - 08:34, 15 March 2024
- '''Question''': Can I use QGIS as the model build/update environment if a model has previously been developed using MapInfo?<br> ...ise yourself with the projection of the MapInfo files used by the existing model. You can do this using QGIS:5 KB (809 words) - 09:16, 22 June 2021
- ...ed to converge at this point in the 2D domain and is an indicator that the model may become unstable. Note that a separate warning is issued for convergence ...cur. A few warnings at a single location or timestep in the simulation are not normally an issue. Persistent warnings however warrant further investigatio2 KB (258 words) - 10:08, 3 March 2023
- If the XPSWMM model includes EPA SWMM hydrology, the hydrology components can be brought across ...SWMM Hydrology runoff method has been used in the XPSWMM model, review the model settings. In XPSWMM, from the top dropdown menu options, go to Configuratio4 KB (661 words) - 11:40, 10 May 2024
- ...File </tt></font><font color="red"><tt>==</tt></font> in the .tcf file has not been specified. A materials file must be specified if .tgc Mat commands ar ...check layer can be used to validate the Manning's n values assigned to the model after all inputs.<br>1 KB (213 words) - 10:54, 23 December 2022
- ...active model area. A preliminary model extent is provided for the tutorial model, this will be copied into a TUFLOW format file. <li>Load the '''2d_code_empty_R.shp''' template file from the '''TUFLOW\model\gis\empty''' folder.3 KB (487 words) - 12:43, 9 January 2023
- ...ont color="blue">Read GIS BC </font><font color="red">== </font></tt> does not appear to be a 2d_bc format file. This has less than the required 8 attrib ...'''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>1 KB (243 words) - 15:09, 7 February 2023
- ...ences, it can also be used to create the TUFLOW folder structure and run a model to create the template (empty) GIS files.<br><br> * TUFLOW Model Projection5 KB (753 words) - 21:30, 5 April 2022
- ...date-time format when using QGIS 3.16 or later. Prior versions of QGIS are not recommended for Isodate (Date-Time) format.<br> ...e is updated and the others are not (e.g. the map outputs are updated, but not the time series outputs).6 KB (1,043 words) - 14:48, 2 June 2021
- ...number of time-series and this makes it much faster to read into a TUFLOW model, particularly if there are a large number of input time-series. It could b ...end index of each output location (some time-seriesmay finish earlier and not contain the maximum number of output times)<br>2 KB (299 words) - 10:55, 29 May 2022
- When building the model I get that error that the save date of a .tab file is later than that of th This '''ERROR''' can be converted to a '''WARNING''' (which still allows the model to start), or turned off entirely using the .tcf command:<br>1 KB (264 words) - 14:51, 6 January 2023
- |message_desc=The ESTRY command is not recognised by TUFLOW. ...Check that this is a valid command, e.g. <tt>"Read GIS Network"</tt> and not <tt><u>"'''Raed'''</u> GIS Network"</tt>.<br>1 KB (151 words) - 10:22, 23 December 2022
- ...aimed at new users, stepping through the process of building and running a model. To begin, watch the following video: ...workflow efficient and flexible modelling environment. Notably, QGIS does not experience the data load/visualisation lag and display issues some other hy5 KB (845 words) - 08:56, 18 December 2023
- ...iles]], and do not create empty template files manually or copy from other model folders.604 bytes (95 words) - 15:51, 4 January 2024
- |tuflow_message=ERROR 1112 - Channel ",a,", also occurs elsewhere in the model. ...s error may also occur with automatically created 1d nodes. If a node has not been digitised at the end of a channel a new node is automatically created.1 KB (177 words) - 15:15, 22 December 2022
- === Simulation Setup and Model Parameters === Coverages already in the geometry component do not need to be added to the simulation. There are no new items that need to be2 KB (344 words) - 15:05, 6 January 2023
- ...ow_message=ERROR 1113 - Channel ",a,"'s ID was duplicated elsewhere in the model. ...s error may also occur with automatically created 1d nodes. If a node has not been digitised at the end of a channel a new node is automatically created.1 KB (179 words) - 15:15, 22 December 2022
- ...the control files we have worked on in the previous steps and defines the model time and output controls.<br> ...n the TUFLOW control files to align with the requirements of a TUFLOW SWMM model. However, since the original control files were intended for use with XPSWM7 KB (1,184 words) - 23:08, 29 March 2024
- '''Note:''' The SA (source area) boundaries are not included in this check file. See the [[Check_Files_2d_sac | 2d_sac check f | Domain_Name||The model domain, this is useful for multiple domain models. For single domain model1 KB (192 words) - 08:43, 25 January 2016
- ...esulted in a negative depth at specified location. This indicates that the model is unstable or unhealthy in this area. ...cur. A few warnings at a single location or timestep in the simulation are not normally an issue. Persistent warnings however warrant further investigatio1 KB (173 words) - 10:35, 3 March 2023
- ...documentation is available from the <u>[[Tutorial_Introduction | Tutorial Model Introduction]]</u> section of the Wiki. Learn how to use TUFLOW by followin <li> After gaining an understanding of TUFLOW through the tutorial model dataset you may be interested in developing some of your own models for tes3 KB (459 words) - 09:41, 4 December 2023
- |tuflow_message=ERROR 0045 - Map Output Interval is not specified.<br> ...this would be output at each timestep. This command must be specified if not using the <tt><font color="blue">Defaults </font><font color="red">== </fon1 KB (252 words) - 10:04, 22 December 2022
- ...nised. Examples of options are: -b for batching simulations; -c to copy a model; and -t to test the input only. For a complete list of options see Table 5524 bytes (83 words) - 10:05, 22 December 2022
- ...geographic projection for GIS input and output data in MID/MIF format has not been defined using the command <font color="blue"><tt>MI Projection </tt></ ...tt>MI Projection </tt></font> <font color="red"><tt>== </tt></font> <tt>..\model\mi\Model_Projection.mif</tt><br>2 KB (343 words) - 23:11, 5 January 2024